• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. F

    hitachi ex60 urg swing box

    Frontier Tractor dismantled an EX60 recently. 800-586-7900
  2. F

    Daewoo Solar 280

    Daewoo S280LC-3 Aka Solar 280LC-3 (and sometimes the 3 is replaced with -III) What do you want to know?
  3. F

    Mitsubishi MS120 / CAT E120 Final Drives / Parts Availability

    Erik, Steer clear of the MS120. It used a Kayaba MAG-55KP unit that is totally obsolete and there is no replacement option that is simple. (I can tell from the photos that it has the MAG-55KP) While CAT is legendary for their support, it is not the case with this machine. Good luck!
  4. F

    some hydraulic help please !

    Did you verify that both sides have the same motor? Are the ID tags still on the motors?
  5. F

    Takeuchi TB035- too old?

    We can support track motors better than OEM's can. Send me a PM and let's talk
  6. F

    Volvo EC30 tracking speed

    Do both sides have the original OEM drive? If they are the same, I would check the case drain on both. You may have one side that has more case drain than the other causing it to perform differently than the other.
  7. F

    1996 samsung exc.

    gwhammy, we can help you with parts. I stock most of the major hydraulic components and can get just about everything else to you within a week.
  8. F

    New/Reman Hydraulic Pump for Kobelco SK135srlc

    almost all of it ;)
  9. F

    New/Reman Hydraulic Pump for Kobelco SK135srlc

    We stock all of the repair parts. Also have new complete unit on the shelf and reman.
  10. F

    Cat 312B Final Drive

    The frame bolts are M16 x 2.0 Depending on what grade you use (10.9 I would think), here is torque table. http://finaldrive.eu/index.php/bolt-torque-settings
  11. F

    looking to buy 2006 JCE Guide Book !!!

    Has to be 2006 ? I'm sure you know of this.? https://www.jencorp.net/en/etc/GuideBook_Help.html
  12. F

    Tb68

    Thanks lantraxco You are correct, this is tough. TB68 came with 2 options. Part number 19031-00200 This unit has an internal brake, it is a Kayaba MAG-85NP-700-1 Part number 19031-00100 This unit has no brake. It is a Kayaba MAG-85N-700-1 Both have been obsolete from Kayaba in Japan...
  13. F

    IHI 35n left drive not responding

    http://finaldrive.eu/index.php/troubleshooting See "external problems" First test is to make sure oil is being delivered to the drive motor. General comments: I always suggest follow the oil. Tank is holding the oil. Oil gets sucked over to pump. Check the suction strainer at the bottom of...
  14. F

    IHI 35n left drive not responding

    We can help you. Click links below for contact info. We're the largest excavator final drive supplier in North America.
  15. F

    EX60URG Final Drive

    9069295 is the part number. It is the same drive as a Deere 70D and they are nearly impossible to find. Good luck!
  16. F

    In search of a final drive for Komatsu PC75uu-1

    We can help. We are the only authorized distributor for Teijin Seiki (Hy Dash) in North America. We stock repair parts for your unit or you can send it in and we'll repair it for you. Or we stock the latest Japanese built style of your unit. You do not need to buy a pair from us. We have the...
  17. F

    OIl leak in SK 160

    What is your email address?
  18. F

    long time everyone! Cat 320cl issue in the drive unit, I am in a rock and a hard spot

    We have stock on 227-6035 Haven't been able to visit the forum lately and keep up with helping people. If you're still looking, we can help. Click link below | | V
  19. F

    Mitsubishi MX-35 Final drive motor

    Unfortunately Nachi hasn't supported the PH300 for several years. I can't even get parts for the units that are 10 years old. They obsolete the designs so fast it's hard to keep up. The only option I have is what you already know. Replace the entire unit. Wish I had better news for you.
Top