• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Swetz

    CAV Injector Pump Stuck? MF135

    Oh boy, I may be in trouble! I have a 445A that is a project, outside under a tarp for over 5 years now. I know I left the cable pulled cuz it did not return on its own....darn!
  2. Swetz

    Arc welder to loosen a link pin, without removal ?

  3. Swetz

    555E Wheel bearing preload torque spec

    The torque that it takes to break free a bolt installed for ~25 years will not be an accurate measure of the real torque that the bolt got new. It may, however, show you that the spec is waaay to high in the manual.
  4. Swetz

    Arc welder to loosen a link pin, without removal ?

    I have heard of people using their favorite penitrating/rust removing oil. Perhaps use the item below to injuec it and let it sit between applications (with fingers crossed...LOL). It does look doable to get the pin out, just a bit of work.
  5. Swetz

    555E Wheel bearing preload torque spec

    Yea man, good thing common sense said dont put that much torque on that bolt. It would snap for sure!
  6. Swetz

    555e Hub Seal

    1998 555E, Thanks so much for sharing!
  7. Swetz

    I have a 2016 Bobcat E26 bleeding hydraulic system

    How about this. BTW, this guy is great. I watch all his videos! https://www.4tetradgroup.com/shop/p/excavator-hydraulic-service-air-bleeder-hose
  8. Swetz

    Case 580E stabilizer rebuild

    well that sucks! I am hoping you disconnected the hydrsulic hoses from the cylinder, or at least the back one. That will make it tough to get the rod out. It sounds like you have bigger problems tho. There is a recent conversation about straightening the rod on here. Can have one made as well.
  9. Swetz

    Case 580D Swing Cylinder Rebuild - Stuck Con Glands - Any tips?

    Thanks for the update! Some frown on the pipe wrench marks, but the pipe wrench will do the job, and as you mentioned, it does not hurt the gland. I am glad it all worked out for you!
  10. Swetz

    What's your hoe doing?

    I always find it amazing what a small tractor can do. My New Holland (Shibura) been through a bunch, and has never let me down!
  11. Swetz

    580M Dipper Bushing Replacement

    yea, the 2 speed would be sweet! So many floor jacks like that today too.
  12. Swetz

    580M Dipper Bushing Replacement

    I have had the one below in my cart for some time on ebay. Just waiting for some surplus funds...LOL https://www.ebay.com/itm/124069311378 The air powered unit is sweet! If you do not use it a bunch, it is expensive. I have both styles. The air unit is Enerpack. It came with my hose crimper...
  13. Swetz

    Case 580D Swing Cylinder Rebuild - Stuck Con Glands - Any tips?

    I know this is posted elsewhere, but just as easy to put it here again. Dont be shy with the hammer!
  14. Swetz

    Different opinions

    I think that their is some merit to his comments. Many have sat in a machine that just "fit" us. This is a great example of why many brands exist. Lets face it, most all machines do the same task in todays world, so, why not get a machine that feels rite to you.
  15. Swetz

    580M Bell Housing Hole

    A small wire wheel on a dremmel. If you dont have a dremmel, put a little wire wheel in a drill. Drinnling a hole in the moddle of a plug, it it is the correct type of thread, would be the best bet. I would insert a cotter pin prior to installing the plug, and bend the wings from the bottom. As...
  16. Swetz

    580M Bell Housing Hole

    The old Ford 555s had the cotter pin setup.
  17. Swetz

    What's your hoe doing?

    The next thing you know it will all be mud:(
  18. Swetz

    Republic Oil 5% Moly #1 Heavy Duty High Temp Grease

    I ordered a similar product from Amazon. It was in a 5 gallon pail. Was previously using the Schaeffer Manufacturing Co. 02212-040 Moly Ultra EP Grease, NLGI #2, 40 lb. Pail Scheaffers was over $300, and the Republic is just over $100. For me it was a no brainer...heck I bought 3 5 gallon...
  19. Swetz

    New member - advice on used backhoe

    Look at the front hubs. If it is 2 wheel drive you will have bearins only. With 4 wheel drive, you will have a planitary gear. This cover is much larger, and will have plugs in it, for the oil, fill/drain/check. Inside the cab you will see a switch if it has 4x4. I would make sure it wirks too...
  20. Swetz

    New member - advice on used backhoe

    extend a hoe, or whatever Case is calling it is nice to have!
Top