• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    Perkins 2300 Series main / con bearing spec

    Hello - thank you for the reply. Yes, we have a unit which we need to overhaul. Id like to remove the crank tomorrow, how ever before we strip it completely Id like to check the main / con bearings to see if they are still with in spec. We'll also need the specs so we can check when it comes...
  2. G

    Perkins 2300 Series main / con bearing spec

    Hello All, Would anyone know the +/- tolerance for the main & con bearings for a Perkins 2300 series engine ?
  3. G

    330D Hi temp alarm

    Hello gents, apologies for not getting back to you sooner - fitted the new speed sensor yesterday and so far so good. We worked this machines for 2 hours yesterday and the temp didn't rise above normal. Fingers crossed this has resolved the issue - thank you for the help on this.
  4. G

    330D Hi temp alarm

    Gents many thanks, I've check the speed sensor and its damaged, the sponge strips are also pretty much non existent now, so we've replaced these. I hope we'll have a replacement speed sensor on site with in the next 2 weeks, we'll fit this and then re check. I will check temp with the gun and...
  5. G

    330D Hi temp alarm

    Vin plate attached, Many thanks for the reply
  6. G

    330D Hi temp alarm

    Hello Gents, We have a 330D on site here, its showing a high temp alarm as of a few days ago. We've replaced the temp senor, We'll run it for 30mins or so and the temp climbs into the red. We're cleaned the radiator. We've not replaced the water pump, so I'll need to look at this, but it...
Top