• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. denver05

    Reverse camera or rear view mirror

    I installed a hard wired multi camera kit on my 1845C. Not being a traind professional operator I find it very helpful when operating in close quarter
  2. denver05

    Skid steer in snow

    Newbie , just got the 1845c for playing on the property. Built a set of chain for the rear , 12 degrees inclined gravel driveway. Works good so far. Will likely add a set to the front.
  3. denver05

    Case 1845C: Newbie Question regarding float and detent

    Larpy, I had the same issue and got help from members on this forum. The inside gets all gummy and the springs and small ball bearing do not engaged. I took it apart cleaned everything up. You can reach the Philip screww head for the cover from the back of the engine with a very long :)...
  4. denver05

    Case 1845C

    Local case dealer did a good job at finding me the new spring and "cup". Installed this past weekend. Seems to be about a 1/4 " difference between new and old spring. I still dont understand why the modifications to an outside spring was done, but all back to original and working...
  5. denver05

    Case 1845C

    Thanks. , I will try the local case dealer, if not I will order on line from Coleman.
  6. denver05

    Case 1845C

    Ok, Part # 20 is missing and was replaced by a flat washer. Which would explain the no tension on the " arm down " function. I think I can fab a work around, but given that everything mechanically/hydraulically seems to work ok. Is there a safety or other reasons why someone would...
  7. denver05

    Case 1845C

    Phil, Any idea on “The only noticable difference is that on the right arm you fell a certain amount of pressure on the lever when you engage the curl or dump function. On the left lever you feel the same amount of pressure when you raise the loader arm but almost no pressure when you lower...
  8. denver05

    Case 1845C

    Thanks phil. 2- is is a fuel heater not a pump. 3- the horn works with the button on the right handle
  9. denver05

    Case 1845C

    Sorry wrong pic on the pre heater question
  10. denver05

    Case 1845C

    Looking at the machine - noticed canister with valve body connecting to engine intake manifold, figured out that it's an ether dispenser option for cold start , no sure if canister are still available in canada or if I will really need it?. Second thing is a fuel pre heater located underneath...
  11. denver05

    Case 1845C

    Guys, Thanks so much for the feedback , day 4 with the machine ( 1992 - JAF0102XXX), so spent the day investigating :) The detent for the float was full of crap/rust - the springs were jammed inside the holders. Cleaned everything out and reinstalled. Still no float.. looked at the...
  12. denver05

    Case 1845C

    Perfect. Thanks. The plow was from surplus auction. Likely foreign made. Should I dissembled the lines and clean them ?
  13. denver05

    Case 1845C

    Thanks much appreciated. Will give it a try tomorrow. If I may ask another question. The 1845 came with a 4 in 1 bucket + I have an angle plow. I read on the forum how dirt in the hydraulic system could do serious damage to the pump. Before connecting either the plow or bucket to the aux...
  14. denver05

    Case 1845C

    new to the forum, Recently acquired a 1992 1845C. With 1500 hrs. Appears to be in excellent working condition. Equipped with aux. but no high flow. Unfortunately none of the manuals were included. Read everything I could on this forum. One of the thing I’m trying to figure out if...
Top