• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    Genie S-65 Engine start up problem

    Would you mind telling how to check the voltage on the throttle body and what it should be? Just out of curiosity, what are you asking for the ECM? Thanks
  2. J

    Genie S-65 Engine start up problem

    Well, did everyone abandon me? I even changed out the O2 sensor and it didn't help.
  3. J

    Genie S-65 Engine start up problem

    Still need some advise...I have replaced the injectors and the fuel damper. Still runs bad. I disconnected the water sensor closest to the engine and it ran pretty well. It backfired upon starting but ran okay, not totally 100% but close. The oil pressure light was on with this sensor wire...
  4. J

    Genie S-65 Engine start up problem

    stvburleson@yahoo.com
  5. J

    Genie S-65 Engine start up problem

    I got the machine fired up on LPG and it runs wonderfully. I first fired it up on gasoline on the 24th and it ran like it was supposed to, but I had failed to put gasoline in the tank with all the things we had tried and it ran out of gas. Put fuel in it and it started running poorly again. Go...
  6. J

    Genie S-65 Engine start up problem

    Okay...I have installed the new temp sensor (the one closest to the radiator) and new MAP sensor pigtail. It still runs just like it did. I unplugged the vacuum line to the MAP sensor while it was running and it didn't change anything either. I killed the engine and restarted it. It backfired...
  7. J

    Genie S-65 Engine start up problem

    I have a new water temp sensor coming from Napa (ECHLIN TS4056) will be in Friday. I unplugged the connector to the sensor and started the machine. It did not change anything as far as running and did not show a code. So I am hoping it is the water temp sensor that is the issue... You can send...
  8. J

    Genie S-65 Engine start up problem

    Not in a pinch. I have tried switching to LPG but apparently the switch ahead of the regulator is bad. Hear that is a common issue.
  9. J

    Genie S-65 Engine start up problem

    I appreciate the response. I am thinking it may be an issue with the connection to the MAP sensor since it ran perfectly when first installed and didn't have the connection fully engaged. I am going to check the pins more closely tomorrow (if I can climb the ladder again) to see if there is an...
  10. J

    Genie S-65 Engine start up problem

    Where did you obtain the pigtail from and part number? Thanks
  11. J

    Genie S-65 Engine start up problem

    Bob, Just saw your reply from Thursday. Been out of commission for a few days with ankle surgery. The sensor F7DZ-10884AA is the one on the right closest to the radiator? If so, I'll try one of those. I still do not understand why the engine ran great right after installing the new MAP sensor...
  12. J

    Genie S-65 Engine start up problem

    Update...I received a new MAP sensor today and installed it. I started up the machine and it ran very well, but noticed that the engine oil light was on. I shut it down and found that the plug in on the MAP sensor was not in all the way. Started it up again and it ran like it had been - poorly...
  13. J

    Genie S-65 Engine start up problem

    Gentlemen, as an update I was able to speak to a Genie tech today. I inquired about the fault codes. The 1-2-3 code flash indicates a normal condition. It will flash three or four times then flash any actual fault codes. I do not have any abnormal codes. I am wondering now if I have an injector...
  14. J

    Genie S-65 Engine start up problem

    Yes, the machine is gas/LPG. My machine is Z45/22 Ser# Z-45-007917 with a Ford Mod# LRG-425I-6007-8 Ser#25934. I have the Service Manual that Genie stated is for my machine Part# 32960 and Parts Manual #52032. But the 32960 does not reference anything regarding fault codes. I looked in another...
  15. J

    Genie S-65 Engine start up problem

    Is there still anyone is still on this thread? I would also like info on locating and deciphering the codes. I have a 1998 Genie Z45/22 with the LRG-425I EFI engine that all of a sudden started running very rough at idle and high. I have cleaned the fuel system, changed the plugs, changed the...
  16. J

    Genie Z45/22 Primary and Secondary Boom Issue

    As an update to the problem with the 45/22, I have checked the pressure on the lift pump and it is well over 3000psi. I haven't discovered anything else as of yet. Still need suggestions... Thanks
  17. J

    Genie Z45/22 Primary and Secondary Boom Issue

    I have 1998 Genie Z45/22 Ser# Z-45-007917. I purchased the lift several months ago and it had been working fine. Then all of a sudden I got stuck up in the air and had to be let down on auxiliary power. Ever since that occurrence the primary and secondary booms will not raise from either the...
Top