• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Electronic Monitoring System Panel

    So my operator/ service manual came in. I am learning a lot as I read through it. One thing I learned is that the two gauges, the trans temp and the coolant temp are factory gauges. so along with the EMS there are also gauges. I have a local company looking for a EMS and will get it in as soon...
  2. D

    Electronic Monitoring System Panel

    I plan on checking the oil pressure this weekend. Do you know what oil pressure I should expect to see when the 943 is at operating temp. At idle and at operating RPM. Thanks
  3. D

    Electronic Monitoring System Panel

    Off-road Equipment does not currently have a EMS but they are looking for one. Until then I will pull that plug and adapt a manual pressure gauge just so I can use the machine and be assured I have pressure. This fall and winter I will familiarize myself with the 943 as well as the manual. Again...
  4. D

    Electronic Monitoring System Panel

    I hope this posts ok.
  5. D

    Electronic Monitoring System Panel

    A previous owner obviously didn’t trust the EMS panel because ther is already a trans temp gauge and an coolant temp gauge mounted on the machine. I believe I would feel more comfortable if I can find a port to put on a oil pressure gauge. Just above the oil sender there is a pipe plug. 3/8”...
  6. D

    Electronic Monitoring System Panel

    I just grounded 405 and no light for oil pressure flashes. The other lights flash when I flip the test switch but not the oil pressure indicator. The warning buzzer does work. I tried to start it and forgot to give it fuel and the buzzer sounded. I assume that was the low fuel pressure warning.
  7. D

    Electronic Monitoring System Panel

    I got the manual ordered. Checked all fuses and they all look good.
  8. D

    Electronic Monitoring System Panel

    Thank you. I will do this tomorrow, first thing!
  9. D

    Electronic Monitoring System Panel

    When I turn the main power switch key the power, (lightning bolt) flashes. No buzzer, no master fault light. I flip the test toggle switch and the coolant temp, lightning bolt and trans temp indicators flash. The oil pressure does not flash. Notr does the buzzer or the master fault light.
  10. D

    Cat engine 3204 oil pressure

    Earlier I made a post about a LED or bulb not working on the operator monitor panel on my cat 943 loader. This loader has the Cat 3204 engine. How can I hook up a manual or electronic oil pressure gauge to this engine. Surely somewhere there is a port or fitting I can tap into. Any suggestions?
  11. D

    Electronic Monitoring System Panel

    I recently purchased a Cat 943 serial # 19Z00750. Since I have purchased it the Check light on the Control panel has quit working. Is this panel still available or can I convert to a gauge. Where on the engine would I get the oil pressure? This is my first post on this forum and my first Cat so...
Top