• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 0

    Brakes locked on Caterpillar 216B

    Finally figured out how to bypass that piece of junk computer. Straight wired the park brake valve and ran power and ground to movement joystick upper solonoid.
  2. 0

    Brakes locked on Caterpillar 216B

    Yea, seatbelt light goes out. Bucket etc works, park brake light flashes and I don’t Have any forward or rearward movement. The ECM is already fried, the bottom of the ECM case is corroded away and has moisture inside board.
  3. 0

    Brakes locked on Caterpillar 216B

    I’ve got a parking brake light flashing (again) and machine lost movement function and brakes are locked. Has anyone here bypassed the ECM and brakes temporarily, just to get this loaded On the trailer and to my shop. Thanks
  4. 0

    Cat 216B

    Thank you Nige very much for your help.
  5. 0

    Cat 216B

    Thanks Tyler, I found the Hall switch rusted and pitted very bad and replaced the joystick, but still no aux. hyd.
  6. 0

    Cat 216B

    I’m sorry, forgot about that. CAT0216BJRLL02281
  7. 0

    Cat 216B

    Does anyone have the wiring diagram for the Auxiliary hydraulic operation on the Cat 216B . Also does anyone know which spool controls this function. Thanks
  8. 0

    Cat 226 Fuel Problem

    Have you checked screen under top of lift pump. You can remove it without taking lift pump off. Blow out screen and re-install. Make sure you don’t lose O-ring under metal top and install the screen just like it came out or it will leak. It has an indention that helps line it up, pretty...
  9. 0

    JD 260 skid steer no crank no start

    I’m not familiar with that machine, you may not be able to get to starter either.
  10. 0

    JD 260 skid steer no crank no start

    Are you sure you’ve got cables big enough to jump off with a completely- Dead battery. Have you tried using a remote starter switch and connecting it to the starter. If you have enough amps to the starter and your remote start doesn’t work it’s probably starter or selonoid.
  11. 0

    JD 260 skid steer no crank no start

    Have you checked battery cables and battery ends real good. It sounds like a loss of continuity to the battery or ground.
  12. 0

    Gehl 4840 fuel problems

    It sounds like either a hole in suction line inside tank or someone got the supply and return lines crossed up if that’s possible on that machine. Just a thought anyway.
  13. 0

    216B lost auxiliary hydaraulics s

    I have a 216B with vin #CAT0216BJRLL02281 that has lost its Auxiliary Hydraulic function on the joystick. Did a visual of wiring, fuses and switch and found the roller switch magnet was excessively corroded. I replaced the joystick and still have problem. Does anyone here know which computer...
Top