• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 8V71

    Dynapac roller

    Check for loose or poor connection at relay terminal slots
  2. 8V71

    2020 Deere 333g hydraulic oil overheating

    I’m sure they already have one going scene Deere is asking for oil samples, But make sure they have a DTAC case going on it. And if you want to keep them on their toes ask for a copy of it. Reading those usually can give you an idea of competence level of the Tech/Techs involved in the repair.
  3. 8V71

    john deere 310 industrial

    Any tags/serial number on tractor? If it’s a gear pump you can calculate the displacement by measuring the center section and knowing the rpm.or check with a flow meter with needle valve and pressure gauge. Are you having trouble with it or going to run something different with it?
  4. 8V71

    Drive chain for bobcat 553

    Those drive chains are usually industrial roller chain. Yes get the chain out so you can get size/sample pitch etc. If you can find an industrial supplier or bearing house nearby they might be able to help you out. I’ve done this successfully with Volvo/JCB machines hopefully Bobcat’s don’t use...
  5. 8V71

    A25c problem

    Had similar issue with an A35D. Turned out to be the A-Stay. Your issue sounds a little more violent than the one I worked on though. If you have a boom truck,crane ,forklift or even a loader to pick up on the nose to check/adjust the hitch/a-stay and other attachments to the axle rule that out...
  6. 8V71

    Bobcat T870 error code E005246-22 emission issue again

    Have not experienced this with Bobcat. I have scene after treatment error codes in Volvo equipment with bad battery or low voltage situations, but never had to reflash software. Usually just had to run through a service regeneration to restore
  7. 8V71

    Changing out dead axle on D7G

    Just saw the legs in the last pic,going back together. That’s a more accurate way to do it.
  8. 8V71

    Changing out dead axle on D7G

    I personally would not own a crawler with out rippers. But If you look at the history and evolution of the crawlers they originated in this are for agriculture purposes so they could run in softer ground conditions around Stocktons Delta area.They were used a lot around here for pulling...
  9. 8V71

    Changing out dead axle on D7G

    We used to pack the shaft in dry ice on re install. Is that how you do it?
  10. 8V71

    Deere emissions timeline

  11. 8V71

    Deere emissions timeline

    According to the year and engine model Looks like it’s tier 3 no DPF
  12. 8V71

    Deere emissions timeline

    Do you have machine serial number?
  13. 8V71

    Detroit Diesel Guru's Needed

    Being they didn’t want to spend the money, hopefully he took those old ones apart, and freed them up. I learned the hard way before. Installed wrong injectors and wrong cam timing. It ran really strong until the pistons started melting
  14. 8V71

    Deere emissions timeline

    Going to depend on serial number. Tier3/Stage III A. DPF no EGR YES Tier IT4/Stage III B DPF yes EGR yes Tier Final/Stage IV SCR/DPF yes EGR yes
  15. 8V71

    Anyone know what brand of lug crimper this is?

    You adjust for the size of cable with the wheel.
  16. 8V71

    CAT 930 HYDRAULIC WHINING NOISE 41k06100

    Noisy hydraulic system common issues, Air entering suction either hose or oring on tubing or restriction in suction. Does the oil look foamy or signs of air.
  17. 8V71

    2007 International 4300 Durastar no power on freeway

    VGT actuator fault codes typically cause an engine derate, might account for power loss.
  18. 8V71

    980K Transmission Cooler Bracket

    I have experienced this as well. It’s not just the 980k’s. I’ve seen this in other applications as well, both vertical and horizontal mounting. C15 uses 10mm bolts and 3406C uses 3/8 bolts for the bracket mounting and I believe they are under sized for the weight of that large cooler. I have...
  19. 8V71

    Detroit Diesel Guru's Needed

    (CAUTION)Trying to run those injectors is not going to end well!
  20. 8V71

    Detroit Diesel Guru's Needed

Top