• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. NWForest

    D6C 10K Transmission Debris in Filter Screen

    One of the first things the guy who serviced the transmission did was checked the oil, I remember him saying it looked good. I didn’t stick around while he changed the filter or see the filter. He has worked on another piece of equipment I have before and he always tear filters apart to see...
  2. NWForest

    D6C 10K Transmission Debris in Filter Screen

    He said he did clean that bottom screen. I was under the impression this machine did not have the oil to air cooler at the radiator, only the cooler on the side. I will take a look and see tomorrow. When it’s running warm the gauge needle is about 3/4 into the green. Then it will sometimes...
  3. NWForest

    D6C 10K Transmission Debris in Filter Screen

    Here are the pictures. A warning, these could be disturbing to sensitive viewers.
  4. NWForest

    D6C 10K Transmission Debris in Filter Screen

    If it’s that expensive, anyone interested in a D6C that runs and operates great except for the above mentioned transmission issues?
  5. NWForest

    D6C 10K Transmission Debris in Filter Screen

    I know it’s damned expensive, I’m just trying to find out how expensive damned expensive is. I will contact the guy who change the oil and see if he still has a picture.
  6. NWForest

    D6C 10K Transmission Debris in Filter Screen

    The power shift transmission operates just fine, except the torque converter start to run hot after a couple hours of use. If I run it easy at half throttle, I can keep it away from going into the red zone. I had someone change the transmission fluid and filter. The filter screen was plugged...
  7. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    Yes I ordered the pump online. The replacement has the same brand and numbers on it so hopefully that will be fine. What you say about websites saying injectors fitting 15 engines is the case. I was having difficulty confirming and cross-referencing numbers. You make a good argument for having...
  8. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    I am finally getting back to this machine. I was going to take the injectors out to have them tested before I install the new Injector pump. I was told a bad injector can cease a pump. I am wondering, since I have them out should I just replace them? I could replace all of them for about $200...
  9. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    Thank you for your condolences. it was a rough one. I have been in email contact with thepumpguy.
  10. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    Ok wrong plate. I see now maybe the round plate that includes the inlet comes off with the 4 screws holding it in with 2 separate plates. I just now did your fuel level test instead with the inlet line off. It is not pulling fuel down. The fuel level does not change at all when I turn the engine.
  11. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    I wouldn’t say it squirts a mile but it does squirt a little. When I turn the engine it squirts about the same as it does when I pump the primary pump. I am guessing that pressure is coming from the engine pumping the primary pump. I took the plate off the injector pump that is next to the...
  12. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    Yes it has a mechanical pull shut down. There are two bleed plugs on the side of the injector pump. Both are getting fuel from the primary pump with no air bubbles.
  13. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    I opened the return line at the injector pump and got fuel when I pump the primary. No different if I crank the engine. I am guessing that is back flowing from the filter side which would mean the line isn’t plugged. When I pump the primary pump manually I feel resistance like it is pumping the...
  14. NWForest

    Massey Ferguson MF30 not getting fuel to Injectors

    Early 1970’s tractor with Perkins 4 cylinder diesel. A few days ago it started easy and ran great, as it always has. After about a minute it shut down. No sputtering, shut down as if someone had pulled the shut off knob. I changed the fuel filters. It is getting fuel to the Injector bleed plugs...
  15. NWForest

    Where is the Fuel Filter on a D6C 10k

    The part that I didn’t mention is that being a D6 Cat in the forest of the Pacific Northwest, of course it quit running in a place where only a D6 Cat can go. In terrain that would make it a little difficult to get an air compressor to it. Today I finally got a chance to get back up to it. I...
  16. NWForest

    Where is the Fuel Filter on a D6C 10k

    There is a drain hose coming down below the fuel pump. When I build up pressure with the priming pump fuel comes out of that hose. Could that mean the fuel pump is bad?
  17. NWForest

    Where is the Fuel Filter on a D6C 10k

    I installed a clean screen. Pumped the primer until fuel was coming out of the valve above the spin on filter. Cranked the engine and got a little bit of smoke coming out of the stack but not as much as usual. Cracked each of the lines on the injectors and pumped until fuel came out. Except for...
  18. NWForest

    Where is the Fuel Filter on a D6C 10k

    The serial is 10K7200. Someone who I thought knew what he was talking about told me that spin on filter was an oil filter. That’s why I wasn’t sure about the fuel filter. I had the engine serviced before I started running it and they changed the spin on fuel filter. I know that because they...
  19. NWForest

    Where is the Fuel Filter on a D6C 10k

    That is my concern now too. Anyone have tips for cleaning out the fuel tank? I know it has a drain plug. Probably a good time to replace the shut off valve which has a slow drip. Good call Nige on the manual. I have already ordered one, waiting for delivery. If only I could go back in time and...
  20. NWForest

    Where is the Fuel Filter on a D6C 10k

    thank you everyone for all your responses. Anyone think this might be the problem? :)
Top