-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Search results
-
D
Want to know d7g (old) fuel consumption
Hello all friends I just want to know d7g fuel consumption I bought a d7g its consumption is about 20 ltrs p/h.is it OK? -
D
D7g location of serial number on frame?
Thnx nige but I think engine is changes and machine is equipped with ripper -
D
D7g location of serial number on frame?
Hello every one, can some one tell me the location of serial number on frame d7g? -
D
D7g load problem
I removed untouched valve and clutch pump from my d6d 31x machine and tested on it but no changes at all.i noticed when machine stops in load the shaft also stop moving but notice too much bubbles in transmission oil -
D
D7g load problem
I have changed pump new pump is installed and I don't have pressure gauge. Can u plz explain clutch pack? I drained torque oil its about 6 or 7 ltrs -
D
D7g load problem
Hi every one, I bought a d7g dozer few weeks ago and done General Mentanance and checked it in load but its too weak to push dirt then I changed oil pump and its much better but still having same issue. The pump drive gear teeths found loose in shaft tomorrow I am going to change pump drive gear... -
D
D6k2 xl cranks but don't starts
Thanks nige for replay 1.the attitude above sea leavel is 1249meter 2.when we start the machine with ether it runs until we shut off and the performance and power is normal.only one thing I noted when you set throttle on eco mode it doesn't work like before . Two time machine started without... -
D
D6k2 xl cranks but don't starts
Thepumpguysc sir it's really complicated without ET but we have to diagnose it -
D
D6k2 xl cranks but don't starts
Fuel pump supplies 40 psi to secondary fuel filters this presupre goes into rail continuesly and relief valve hold it to 36000+- psi .if it's above they requeired pressure sensor must sense that pressure and ECM detect high pressure or if it's not building enough pressure ECM also detect low... -
D
D6k2 xl cranks but don't starts
Dear I have changed injectors they only runs 50 hours -
D
D6k2 xl cranks but don't starts
Newguy2k3 sir I have changed all 6 injectors+ sensors related to starting .I think rail pressure is ok coz I disconnect rail pressure sensor line and cranked machine it shows high fuel rail pressure.and I also checked pump pressure with pressure guage it's 40 psi and cat says 40 psi for c7.1... -
D
D6k2 xl cranks but don't starts
Dear kshansen sir I followed the chart send by u and thanks for helping me I have test everything but compression tester is not available there.fuel pressure is 40 psi cranking speed 167 n/min.air inlet turbo all clear.there are no diagnostic codes speed sensors crank and cam changed fuel rail... -
D
D6k2 xl cranks but don't starts
Dear newguy2k3.sir I have followed each and every instruction problem is this when u guys commint there is night or I am on machine that's why I rply late otherwise I really find helpful your every suggestion.1 when machine started on either it's runs fine smooth how long u want to work there is... -
D
D6k2 xl cranks but don't starts
Hello everyone thanks for help after a long trubleshooting machine started after valve lash adjustment and I have run it about 5 hours unfortunately a high pressure line(transparent) leakes which I installed in between fuel pump and secondary fuel filter for testing purpose air in fuel after... -
D
D6k2 xl cranks but don't starts
Paul council sir thanks for ur help u really try to do but in this forum Seniors are not intreinter in our problems sorry to say but it's reality I'll solve my problem with the help of seniors on this forum or without them.i personally requiested some senior members for help but unfortunately... -
D
D6k2 xl cranks but don't starts
4750 hours on this machine.i have paid alot to cat technicians and purchased 6 injectors ,valve sensors every thing and they installed each and everything by themselves now I tired for paying -
D
D6k2 xl cranks but don't starts
I don't have tools for compression test . -
D
D6k2 xl cranks but don't starts
Product identification number=CATOOD6KHMXK00267