• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Pc120 hydraulic issues

    Anyone have a service manual for a pc120lc-6EO. Serial kmtpc037p02071912. Seem like it’s sending all the pressure to the tracks and very little to the boom
  2. M

    Line boring rates

    This topic may already have been discussed on here but I’ll ask anyway. What are opinions on how to charge for line boring. Just charge hourly rate and be efficient , set up fee with a time allowance then hourly rate after that ? Also what about removing bucket and old bushings or what ever it...
  3. M

    953c 3116 injector cup replacement

    I’ve got a 3116 that is putting exhaust into the fuel. I pulled the cab off today and will start the job Monday. I’m borrowing all the tooling from a friend. He gave me several tips. I plan on replacing the rack as the engine has 14,000 hours. Any other tips or pointers for cutting the new cup...
  4. M

    Kobelco sk210 wiring schematic

    Does anyone have a wiring schematic for a sk210. Serial y008-u3025. I’ve got a pink wiring coming out of the key switch and going to computer case ground. I doubt kobelco uses punk ground wires. I clipped it from the key switch and got the machine started due to the rigged throttle that is on...
  5. M

    International 175c cylinder packing

    anyone of a part number on bucket lift cylinder packing. Looks like this one has the 2 piece piston as well. I am also looking for loader control valve spook seals. But I can probably get those at the hyd shop. Serial number 4290004u004136. Thanks guys
  6. M

    International 175c cylinder packing

    anyone of a part number on bucket lift cylinder packing. Looks like this one has the 2 piece piston as well. I am also looking for loader control valve spook seals. But I can probably get those at the hyd shop. Serial number 4290004u004136. Thanks guys
  7. M

    Lx885 drive motor

    does any one have in info on where to get a 2 speed drive motor or parts to rebuild one. New holland says they are obsolete. You can get a rebuild kit form them for 1200 dollars which will be last resort. It’s a Eaton pump but hyd. Shop can’t do anything with the numbers
  8. M

    315c prv won’t calibrate

    ive got a 315c. Serial number cjc 03823. I put a prv valve on it and when trying to set the low pressure to 220 psi like sis says even if you scroll all the way up to 30 the best you can get is around 180. If you skip that and go to the high pressure. It will set fine. This thing has me a little...
  9. M

    D38p-1 steering issue

    so I’m looking a dozer that one of my customers has. S/n 4740004p086. And thinking about buying it. It seems to be slipping on the right side. It struggles to make a left turn and the right track won’t spin when against a wall. Is there a place to check clutch pack pressure compared to pressure...
    • Mbar
    • Thread
    • Replies: 0
    • Forum: Dozers
  10. M

    F750 clutch

    My service truck is a 07 f750 with a c7. It’s got the Eaton 6 speed. It’s getting time for a clutch now. The engine has been re flashed and running marine injectors. I need something if any to hold a little more power than the stock clutch. Any ideas would be appreciated.
  11. M

    D5g drive coupler

    ive got a d5g wgb00840 with what I’m thinking to believe a bad pump pump drive coupler. Loki g for opinions on what people like best. Engine or pump removal ?
    • Mbar
    • Thread
    • Replies: 8
    • Forum: Dozers
  12. M

    Total 15w40

    Does anyone have any experience with this oil. My supplier are mainly chevron delo dealers but are saying this is a very strong competitor. Thinking of switching due to delo never ending price increases but would like to see more than just spec sheets
  13. M

    Komatsu d66

    is anyone very familiar with these machine. I’ve got one with a stripped implement pump drive spline. Looks to me the torque splitter with have to come out of the machine and disassembled. Customer says other wise. looks like straight forward repair just a lot of work.
  14. M

    EX200-3

    I’ve got a EX200–3 that is acting up on the hydraulics. It will either bog the machine down when you use the hydraulics or be very slow like the pump isn’t stroking. I’ve checked the angle sensor wiring and it is fine. My question is can the sensor itself be checked with out dr. Ex. And can...
  15. M

    KOMATSU d66-1

    Does anyone have a service manual for a d66-1. Ser. Number 01 185. Lost all implement functions. I think it may have stripped the pump splins. Looks pretty straight forward to remove, however some litature would be helpful for pressure testing. Thanks in advance
  16. M

    955L

    wondering the difference in a 85j American made 955L and a 71j gray market 955L if any. Hopefully some of you guys with knowledge of these older machines can inlighten me.
  17. M

    Cat 320bl

    Does anyone have a hydraulic schematic for a 320bl. Serial number 6cr04372. The machine went up in smoke and a hoser came out and made all new hoses. now several of the functions are not working and it got dumped in my lap. My sis account is not acting right and the closest paper manual I have...
  18. M

    Paccar mx 13 dpf delete

    does anyone have any experience with dpf delete on a paccar mx13. What program did you go with and have any reviews on it. Thank in advance guys
    • Mbar
    • Thread
    • Replies: 9
    • Forum: Trucks
  19. M

    Gehl 480

    Does anyone have any knowledge about these machines. I’ve got one that will not move forward or reverse. Loader and steering work fine. I finally got a portion of the manual from a dealer the was kind enough to help but it wasn’t much of a test procedure , more of a adjustment guide. Any way I...
  20. M

    953c loosing power

    Hey guys. I was approached today about a 953c (2zn02623). Operator claimed machine was loosing power when digging into a bank but could ease up on the travel speed and let it catch its breath so to speak. I asked if he could hear the motor slowing down and he said it seemed to be only the hystat...
Top