• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    Case hood color

    Does anyone know the Case part number for the hood paint color on a 2006 Case Super M series 2. Mine is coming off about like every other one of that vintage. Thank you.
  2. R

    Takeuchi TB180fr slow oil leak

    Have an oily hose way above the swivel joint that i cant even see in from the bottom or top. Not leaking much but wondering how a person can see whats going on before it blows somewhere. I tryed using my phone but hasnt worked.
  3. R

    2016 Cat 301.7D CR ROPS removal

    I watched a video on YouTube where a guy took a Rops off a cat 304.5 to work on it. Didnt show him unbolting it. Looks like it can be done at least on that machine.
  4. R

    Selling my 580K and buying something else

    Keep it and buy an excavator.
  5. R

    I HAVE SEVERAL QUESTIONS ABOUT A JCB 3CX

    Put a piece of tape over the light. Problem solved.
  6. R

    EX60 - worth it?

    quarter mile? put it on skids and drag it their or just drag it.
  7. R

    2012 Takeuchi TB180 fr No throttle/hydraulics

    Did you figure out the problem? If not sure wish someone would reply with the answer as I have the same machine and might have this problem some day. I have had mine about a year with no problems yet, knock on wood.
  8. R

    1980 Case 580C questions and specialty tool?

    i had one good machine, their is a trick to over center lock, they all had bad brakes, dont need special tool. Make sure it has the drive shaft from shuttle to transmission.
  9. R

    1979 Case 580C Backhoe Left Drive Tire Won't Turn

    The C has kind of a phony brake system. They have steel balls that ramp up when you use the brake. I bet their just stuck up, their known to put you threw the windshield when roading it.
  10. R

    Case 580c throttle lever not staying set

    If you ever have to take the master out again this is how i did it when i had a C. Take a hole saw and drill a hole on the side of the console across from the master. You can remove it that way, then just plug the hole for next time. Saves a lot with out taking out the console.
  11. R

    CASE 580 L SERIES 2 transmisín filter

    I have a SM same thing, it can be done. I did it from the top, not fun.
  12. R

    Worst backhoes

    If your looking at a older Case 580c I know some maybe all had a drive shaft from torque converter to the Transaxle. Makes it nice to remove it , can be done easy. Unbolt it , raise up with stabilizers, take wheels off and drag out with hoe.
  13. R

    Can I plow snow w this 2wd backhoe?

    On the C that I had, wasnt enough clearance between inner fender and tire to put chains on.
  14. R

    Case 580C 3rd and 4th gear

    Ya the C that I use to have was same way.Get up some speed shift to 3rd and fourth and would travel on level alright and a little grade but not much.
  15. R

    Boom Movement Noise

    My excavator did the exact same thing when I got it, doesnt now. You need grease somewhere.
  16. R

    Tb180fr advice

    I took your advice heymccall and took the whole valve out, I see how it works now. When I loosened the whole valve the track slacked off. No oil came out. The small wheel valve worked easy when I had it on the vise, guess was so much tension on it. Put back on started it up , hit 2 speed and...
  17. R

    Tb180fr advice

    Thanks I will try that, then hope it will tension up right.
  18. R

    Tb180fr advice

    More questions on this takeuchi tb180fr steel track with automatic track tensioning. One of the tracks is banjo tight , way to tight. I took off the plate and loosened the locking plate and tried to turn the knob, to tight, took knob off and tried to turn with a wrench wouldnt budge. I hate to...
  19. R

    Tb180fr advice

    Thanks a million to all the responses, saved me a lot of time. I purchased this machine I guess knowing parts are hard to come by in Montana but I dont make a living with the machine just use it around the ranch. Dont think Ive ever read a negative thing about takeuchi so hope Im happy with it...
  20. R

    Tb180fr advice

    i know this is an old thread but thought maybe someone can help me out. I have the same machine and for the life of me I cant find a ac belt for it. Didnt have one on it when i bought it, have searched internet a lot. No dealers here close in Mt .It is a 1784#### and has the 4tnv98 Yanmar. Also...
Top