• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Old but new to me IH175C loader

    Hi from down under My tip would be make 1 or 2 shallow troughs out of sheet plastic with a few short stakes to suport it or them fill with 6 inches of diesel , lower machine into them using the bucket let it...
  2. M

    175C roller flange flumux

    Not me mate cheers malcolm
  3. M

    175C roller flange flumux

    Hi Barky That is correct we always did it like that as single flange rollers were cheaper and you don't need double flanges on every roller. The double at the front helps line up the chain into the rollers and then its all ok .The main thing to remember is not...
  4. M

    IH 175B The Beast!

    Hi Tfphill Ist things first check the trans filters both the washable suction filter and the replaceable paper one. Tell me what pressure the gauge reads I think that is main clutch engagement pressure not torque converter feed pressure . next put the...
  5. M

    Rubber tyred dozer

    Hi Timmy Same deal as RnR but you should be able to drag these photos of this page to your photo library or your desk top cheers Malcolm
  6. M

    D11T frame up Rebuild

    Hi Guys Blurred high speed videos do nothing for me .A 30 min vid showing the main points would have been really great , oh well it might just be me regards from cold wet New Zealand Malcolm
  7. M

    Ih 175 b

    Hi The easiest way is to lift the tracks just clear of the ground with the bucket and some blocks set it turning slowly in low gear and pour diesel onto the links where they open up going around the sprocket , you may have to let it soak in by leaving overnight and have another try the...
  8. M

    Tree pushers.

    A couple of kiwi 1960s photos cheers malcolm
  9. M

    TD20B Steering Problems

    HI first go back to basics pull both levers back half way and the machine should loose drive and stop , do this test and tell me the results and we will go from there - regards Malcolm
  10. M

    Historic NZ Earthmoving Projects

    Thanks Ray for the pics These are the 1st pics I have seen of a TD24 with a single exhaust pipe , It must have been the last of them they are all late model ones with the air cleaner on the left hand side but the last pic shows 2...
  11. M

    Historic NZ Earthmoving Projects

    Some Photos of Craws
  12. M

    Wabco 101F scraper? POS?

    Hi Some info , A late model one now at 11yds early ones were 9yds cheers Malcolm
  13. M

    LeTourneau A4 Dozer pushing Scraper

    Thanks LakeRat1 This is what this form is all about ,Ifyou have photo posting problems email them to me and I will post them for you cheers Malcolm
  14. M

    India transport

    more
  15. M

    India transport

    I have a friend who goes around the world assembling UNIT RIGG trucks pics of a truck arriving on the job this section weighs 70 tons enjoy Malcolm
  16. M

    TD15c trans problem

    Hi now that you have located the f1 hose ok you could disconect it at the bottom end and put a gauge into it or put the end in a bucket with some rag around it ,give the lever a flick just to make sure that hose is ok and not blocked with the inside core coming apart ,better to...
  17. M

    TD15c trans problem

    HI Now that the suction screen is clean (lucky you) it points to the pilot pressure control system from the lever to the main spool valve maybee at fault . If you can locate the forward and reverse low gear hoses from the lever to the valve ,(I know they are all together in a...
  18. M

    Historic NZ Earthmoving Projects

    More
  19. M

    Historic NZ Earthmoving Projects

    Sorry Ray Got side tracked off your thread , Here is the Mangere Airport pics i have cheers Malcolm
  20. M

    Historic NZ Earthmoving Projects

    HI Not sure about the red ones at Matahina must have been in to much of a hurry to earn a buck than do sign writing the others are mainly Roadmakers you are right Merv Baldy and wife
Top