• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Dmoneyallstar

    CASE 1845c Restoration. Follow my progress!

    Wondering if you had any control valves or pumps rebuilt? If so, di you do it yourself or drop it off to the dealer/shop while you were sprucing up the paint?
  2. Dmoneyallstar

    Case 430 drive train clicking noise.

    I'm scared to overhaul my chain cases for all these reasons, but it needs to get done this summer. Luckily I use the machine lightly. The clicking noise...I had same noise on my 1845c and it was the parking brake pin on one side that needed adjusted.
  3. Dmoneyallstar

    Case 1845c ('91) Aux Hydraulic Controls Help

    Sorry. Machine is a JAF0067XXX, early 90's.
  4. Dmoneyallstar

    Case 1845c ('91) Aux Hydraulic Controls Help

  5. Dmoneyallstar

    Case 1845c ('91) Aux Hydraulic Controls Help

    I've got the schematics. Will find the right ones and upload later. Thanks!
  6. Dmoneyallstar

    Case 1845c ('91) Aux Hydraulic Controls Help

    I'm running a 3pt adapter attachment (has 3pt connections plus a hydraulic motor with PTO output). Its motor is rated for 14-20gpm, and my 1845c is 16gpm. Tiller is only a 50" and using it in an existing garden -- nothing severe. Only other attachments I've run on aux were just cylinders -- no...
  7. Dmoneyallstar

    Case 1845c ('91) Aux Hydraulic Controls Help

    Running a small hydraulic tiller off my aux hydraulics. When I press the pedal either direction the flow seems slow based on the slow rotation of the tiller. But when I bump the left-hand control handle up (towards boom-up), I get much higher flow and it runs the tiller great. Just kind of a...
  8. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    Nope. I'm just going to assume that putting the left hand control in the neutral position allows full flow to the aux hydro. I'm stunned the owner manual and the set of sealer shop manuals I have doesn't really cover how the aux hydro works.
  9. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    May have answered my own question....my old man read the sight gage on the hydraulic reservoir wrong. It was a mere 15-qt low after purging the old fluid and adding new -- that's all, LOL. There was a smudge on the sight glass and he thought it was actually showing fluid. Sump is 42-qt. Good...
  10. Dmoneyallstar

    Which coolant? Case 1845C Cummins

    I used to work for purchasing at Honeywell when they owned Prestone (when they owned Prestone-FRAM-Autolite-Bendix-Holts). The pre-diluted stuff is simply convenient. So you're getting less ethylene glycol, but gaining the convenience of the pre-mix. Since tap water (city or well) can be full...
  11. Dmoneyallstar

    Case 1845c loader control valve, 108220A1, 1 used, 1 new

    108220A1 loader control valve for 1845c with serial JAF0122751 and newer. I've got 2 valves: 1-qty new-in-box 1-qty used with fittings, pulled from running machine Got these in a package deal and do not need. Make offer. PayPal, Venmo or cash in person. We also have Square-Up if u want to...
  12. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    Next question.... Aux hydraulics. I'm running a 50" tiller on the front. Pressing the pedal gives me slow power. But when I move the left drive hand lever "up" a tad (just short of a boom-up signal) I get full power. Is this normal? Or is there something amiss in my flow control?
  13. Dmoneyallstar

    CASE 1845c Restoration. Follow my progress!

    Looks great! Wish I had another steer or a gantry crane to disassemble my 1845c and give her a make-over like this.
  14. Dmoneyallstar

    Case 1845c questions: Block heater, parking brake, hydraulic hoses

    GO CHIEFS! And I'm in crappy Browns and Lions country. Was so sad to see everything that happened to KHunt -- we both went to UofToledo. Larpy...if you haven't done so already for your block heater, buy the new block heater and then just try replacing the cord. The interface / pins get a little...
  15. Dmoneyallstar

    CASE 1845c Restoration. Follow my progress!

    Wow, that thing looked pretty clean on the inside in your "before" pics -- definitely cleaner than mine. Hardly any rust in yours. Looks like it was stored indoors for most of its life.
  16. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    And a short vid of the plow & aux hydraulics working...
  17. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    No prob. - The cross-over is "Prince DRV-2HH Double Relief Valve, Differential Poppet, Cast Iron, 3000 psi, 30 gpm", cost me $78 on Amazon. - Meyer plow with HD quick-attach mount was $350 for sale locally - Angle cylinders are 1-1/2 x 10" (16-1/4" to 26-1/4" length with 5/8" pin) and were...
  18. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    It's a Meyer 7'6" plow with a quick-attach plate & braces. I bought it like that used, but the prev owner had welded a pair of tubes to keep the plow straight -- no angle cylinders. I added a pair of new 12" angle cylinders, added a cross-over relief, plumbed it up, and obviously cut the...
  19. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    Parked inside a pole barn. I do have ether-start, but only use when I really need to. Usually when it's freezing or colder, doesn't take much time to get it warm. I also keep the battery on a trickle-charger.
  20. Dmoneyallstar

    New-to-Me 1845C -- questions, etc

    Got to use the plow setup a couple of times with great success. Hadn't had time to get the steel cutting edge apart and install a rubber edge. But I ended up just using steel shims on the plow feet to get about 3/16"-to-1/4" clearance and it cleans the driveway nicely. As soon as much snow...
Top