• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    JD 310D Husco Loader Valves

    Several hours on it an no leaks.
  2. J

    JD 310D Husco Loader Valves

    What I found when I took the valve apart was not making sense to me. I would have expected one of the U-seals to be on the lower end and one on the top end. When I got home tonight I took the valve back apart. I also tried to removed the round stub that stuck out of the lower end. This...
  3. J

    JD 310D Husco Loader Valves

    It finally quit raining and I had a little time to look at the valves. My loader valve was the one leaking. Here is what I found. The lower end, opposite the linkage, only had a wiper. The upper end near the linkage had two all rubber U-cup seals. These measured approximately 1.0" in...
  4. J

    JD 310D Husco Loader Valves

    I am waiting for some AN wipers I ordered to arrive to see if those will work. The link below has some information from Husco, see page 4. https://www.hydraulicdistributors.com.au/downloads/2019-product-brochures/Husco.pdf Note: The “Zero Leak” seal arrangement contains a lip seal that...
  5. J

    JD 310D Husco Loader Valves

    I did some more looking and found some information on the JD parts website. It looks like there are just a few seals to replace. They come in a JD kit AT168675. Unfortunately the kits are rather rare and expensive. I found some information on the Husco website. Reference the spool valve...
  6. J

    JD 310D Husco Loader Valves

    Hello, I have a 310D that I am trying to slow down the leaks on. The big ones are some of the cylinders, where I am replacing the seals, as well as the rods on the stabilizers. I repaired a crack along the weld at the bottom of the hydraulic tank a few years ago. The last significant leak(s)...
  7. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    Today I replaced all six hydraulic radiator hoses, 4 are 1/2" and two are 5/8". Getting the hydraulic tank back in was a lot easier than getting it out. I rounded the edges of the tank near the top ans the frame at the top radiused part. I think doing this help significantly. The adapter I...
  8. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    I am just finishing up putting the reverser back together. I purchased a seal kit, A502002, which included the bellville washer as well as several snap rings, in addition to numerous seals. I highly recommend that you get a copy of the service manual before rebuilding or repairing this...
  9. J

    310D Hydraulic Reservoir Leak

    Its always something. While I have the reverser out for repair, and am waiting for parts, I was looking for the source of a hydraulic leak. Unfortunately I found it, and it was not a loose fitting as I had hoped. The crack is visible in the attached photo. This is the return fitting to the...
  10. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    Thanks. I think the reinstall may be the hardest part. I will be trying your method.
  11. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    Thanks. I plan on replacing many of the seals since I have it apart. Regarding failure modes, according to a tech who used to work on these "the forward clutch bellville washer was the biggest offender and when it failed you could lose fwd or it could lock in fwd and bind up when you try to...
  12. J

    John Deere 310D Reverser

    he washer is included with the seal kit, PN A502002. I just ordered one from reliable aftermarket parts. I found the washer itself on the case parts list, PN D50047, but I need some of the seals and gaskets. Below is a picture of the washer.
  13. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    The washer is included with the seal kit, PN A502002. I just ordered one from reliable aftermarket parts. I found the washer itself on the case parts list, PN D50047, but I need some of the seals and gaskets. Below is a picture of the washer.
  14. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    I just opened up the reverser. The reverse clutch looked great, which worried me a bit since I lost reverse. However, when I pulled out the shaft from the forward gears about six pieces of the belville washer came out. Everything else look great. There was very little in the pan or filter...
  15. J

    John Deere 310D Reverser

    I just opened up the reverser. The reverse clutch looked great, which worried me a bit since I lost reverse. However, when I pulled out the shaft from the forward gears about six pieces of the belville washer came out. Everything else look great. There was very little in the pan or filter...
  16. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    Got it out ok. Of course the one bolt behind the solenoids was the one that took 90% of the time. I'm going out this morning to open it up and see what it look inside before I order parts. For anyone else with a 310D, I had to take the dipstick tube and solenoids off. There are different...
  17. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    Thanks. I think the C and D are pretty much the same when it comes to the Reverser. I'm headed out to get a transmission jack right now.
  18. J

    john deere 310c Borgwarner shuttle rebuild for beginners

    Geminijo, I just moved my 310D int the shop and hope to pull the reverser sometime in the next week. The shop manual calls for removing the torque converter with the reverser. It sounds like you left the torque converter attached to the engine. Is this correct? Is there anything you would...
  19. J

    310c reverser problem.

    I need to do the same to my 310D. Which rebuild kit did you go with? For some reason the rebuild kit for the case is about $100 less than the kit for the JD, even though everything I have read says the Borg Warner made shuttle is the same on the 580's and the JD's from that era.
  20. J

    Parts manual/catalog

    Try this: https://www.epcatalogs.com/john-deere-300d-310d-315d-backhoe-loaders-repair-technical-manual-tm1497/ Also has 1496 manual John
Top