• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. K

    Kubota SVL 90-2 lift arms wont stay up

    There are 2 of the 550 relief cartridges, you could count the threads that are exposed and set the other one to match it . They should be set the same. If you swapped one 550 with another 550 and it did not change then your problem is not in the 550.
  2. K

    Kubota SVL 90-2 lift arms wont stay up

    After running it for a while it cleared up and all is working like it should, must have been something in the valve.
  3. K

    Kubota SSV65 EGR & DPF deletes?

    I had the same code E 9400 on SV:90-2 and the machine shut off. would not turn over (just a click) . after setting for an hour it started up but was it was skipping real bad. able to get it back to the shop yesterday. Tried to start it up today to move it and it would turn over but would not...
  4. K

    Brush Cutter leaking oil around the cutting blade

    I did have some wire wrapped around it. I think I will try the grease in the bottom and then the oil on top. Thank you all for the advice.
  5. K

    Brush Cutter leaking oil around the cutting blade

  6. K

    Brush Cutter leaking oil around the cutting blade

    I didn't get a book with it, on the receipt is says "Brush Cutter -N-92" BC92 3 Blade". it has a Eaton hydraulic motor that drives the blade. I need to contact the vendor for a parts break down.
  7. K

    Brush Cutter leaking oil around the cutting blade

    I have a brush cutter for my skid steer and it is leaking oil around the blade (not the hydraulic motor). It has a site glass and port to put oil in , the vendor said it takes hydraulic oil, it is leaking as fast as I put it in. I have ordered a new oil seal for it. Any ideas on the best way...
  8. K

    Concrete/Rock hammer on Kubota 90-2 (recomendations)

    Does anyone know if there any problems with using a concrete hammer on a Kubota 90-2 skid steer ?
  9. K

    Kubota SVL 90-2 lift arms wont stay up

    That could be a possibility. you gave me something to think about. I will post any changes I find. Thanks
  10. K

    Kubota SVL 90-2 lift arms wont stay up

    I took it apart and cleaned it, it did not help it so I exchanged it with the one on the downward bucked. The control arms are working as they should. But now when I take the bucket to the down (dig) position and when I release the controls it will drift to the level position. I can live with...
  11. K

    Case 580SE Backhoe (left side brake does not work)

    On my Case 580SE Backhoe the left side brake quit working, the pedal bottoms out. Any help on where to start. Any help will be greatly appreciated.
  12. K

    Kubota SVL 90-2 lift arms wont stay up

    Does anyone know if the overload relief valve can be rebuilt. The cost is $588, part # V0511-63640.
  13. K

    Kubota SVL 90-2 lift arms wont stay up

    It ended up being one of the overload relief valves in the lift arm section of the control valve assembly. Thanks again for your help I appreciate it.
  14. K

    Kubota SVL 90-2 lift arms wont stay up

    I will post what I find, it may be a few days before I can get too it. thanks to all for your input.
  15. K

    Kubota SVL 90-2 lift arms wont stay up

    I raised the boom up and then tilted the bucked down and it drifts down and lifts up the machine in the front and holds it up (does not drift). With the boom lowered I curled the bucket and it holds the machine up and stays up (does not drift).
  16. K

    Kubota SVL 90-2 lift arms wont stay up

    Anyone have any ideas on why my Kubota SVL 90-2 lift arms wont stay up. I was using a brush cutter and it still works but my lift arms will not stay up. I removed the cutter and the loader arms will not stay up, it will lift the arms but they drift all the way down. I am not getting any codes...
  17. K

    Kubota SVL 90-2 error code E9100

    There is no rpm sensor it gets the rpm from the crankshaft position sensor. I took it out and cleaned it and also the electrical connector. looks like that took care of it, used the machine all day yesterday and it did not come on.. Thanks again heymccall for the info.
  18. K

    Kubota SVL 90-2 error code E9100

    Thank you heymccall I will try to check the Rpm sensor and wiring if I can find it before I contact the dealer.
  19. K

    Kubota SVL 90-2 error code E9100

    I am getting an error code E9100 on my Kubota SVL 90-2. It is coming in for a second then clearing, it does this a every few minutes. any one know what may be causing this ? '
Top