• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. H

    Kubota svl 75 finals shot

    I pulled the machine home from the Kubota dealership today. I was more interested in getting it loaded than getting a blow-up of the parts with p/n's. They said the internal splined shaft will need replacement also and if it looks anything like the one they had removed, I would agree. I'm not...
  2. H

    Kubota svl 75 finals shot

    Ok thanks a million tones. I'll work on contacting nabtesco or find a distributor for their products.
  3. H

    Kubota svl 75 finals shot

    Actually I think the two shafts combined were 4000 plus labor to rebuild. ...too much. I'm thinking let this machine set until someone decides to build an aftermarket part?
  4. H

    Kubota svl 75 finals shot

    Yes, I think their quote was13,800 for both. Most of the drives for other make machines are in the $2000-$2500 range
  5. H

    Kubota svl 75 finals shot

    We checked the oil in the drive after we heard a whining sound, and the fluid level was ok. Come to find out the shaft splines are worn bad enough that it couldn't pull itself up the trailer ramp.
  6. H

    Kubota svl 75 finals shot

    I put an average of 500 hours per year on this machine. Kubota recommends changing at 250 I think. Our fluids are changed annually, kinda when I can find enough down time to take it to the Kubota dealership
  7. H

    Kubota svl 75 finals shot

    In one of them, there are small, splined shafts that have excessive wear. On the other, the double shouldered seal has ripped and without us knowing the gear oil has leaked out. The inside of the drive was dry when we realized the problem. The bearing surfaces have enough wear to need...
  8. H

    Kubota svl 75 finals shot

    New to forum. My 2014 svl 75 2200 hours finals serviced by Kubota at 500 hours, used for feeding cattle mostly, 10% dirt work. Should I have to pay 14k to have finals replaced? Can't find after market parts. Any advice appreciated.
Top