• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. T

    1995 ford f800 5.9 cummins repair manual and wiring diagrams or electrical software.

    Yeah! I think Google has coupler of thousands, in any shape or form possible.
  2. T

    Sky track B8400, need help

    Hi guys. Does anyone can help me with manual or at least steering/brake manifold diagram for old Skytrack B8400? I can’t find anything on these pre JLG models, and already getting lost in the numerous versions of the newer circuits. Steering sometimes getting heavy, operator can’t remember...
  3. T

    charging pressure too high on Bobcat T300

    The plugged charge filter - of course. Also leak in the brake piston. I was about to work on 300 once, but it didn’t happened, so I don’t remember where the parking brake and high speed gets powered from. But majority powers from the charge circuit, or at least from the same gear pump.
  4. T

    charging pressure too high on Bobcat T300

    And you can’t clean the return filter. You can clean charge filter - but replace them after failure like this, because tiny particles are still stuck in that mesh.
  5. T

    charging pressure too high on Bobcat T300

    If you hear the squeaks - it means you’re other brake piston seal is leaking, and you burning another set of brake discs.
  6. T

    charging pressure too high on Bobcat T300

    So the loop didn’t get the metal shards? Metal shards will plug your filters very fast. They will make bypass on the return filter open up and render that filter useless. Also of your parking brake and high speed circuits powering off of the charge circuit - leak in the parking brake will drop...
  7. T

    charging pressure too high on Bobcat T300

    What was the reason for replacing final drive? Was it hydraulic side problems or planetary side? Is the right side has power now. Asking because if it was hydraulic side problem, the debris from the motor damages the pump also.
  8. T

    RT755 slip ring tower

    That’s what I decided to do about short wires. I think it might be better than extending with the piece of wire of different color with crimped sleeve and heat shrink.
  9. T

    RT755 slip ring tower

    I did my best. I actually marked two pairs with A and B that didn’t have anything on them. I’ll try local dealer, but I don’t have big hopes for it.
  10. T

    RT755 slip ring tower

    Thank you sir! I am kinda under time restraints, looking for help with a diagram in electronic format. It’ll take a while for that paperback to get here.
  11. T

    RT755 slip ring tower

    Can someone help me with the slip ring tower wiring diagram on RT755? Went to rebuild the pneumatic swivel, half of the wires had the labels fallen off of them, colors faded out. I did my best to renew the labels on the ones that was barely hanging out before I pull the whole thing off. Looks...
  12. T

    Multiquip DCA-70ssju4i water in fuel system damaged engine?

    Interesting thing is going on with my customer right now: he has 310SG and 310SJ. Both running OK, both had problems with right side turn knuckles ( serious problems), that I have recently kinda-fixed, both need bushings replaced on backhoe and the loader. But both start and run like champs...
  13. T

    Multiquip DCA-70ssju4i water in fuel system damaged engine?

    The rebuild/exchange is $3500-$4000 all over the internet for those. The question is about the quality of that rebuild - but anyway! That one is already generator engine ( at least was built as one from the beginning, by the code). You can buy generators or screw compressors with those in them...
  14. T

    Multiquip DCA-70ssju4i water in fuel system damaged engine?

    I am just curious - what was the main reason to “total” the machine?!?! Was a crankshaft gone, or the engine block in pieces? Or simply high pressure fuel pump and injectors needed to be replaced (which is more than 100% understandable with water in fuel)? I don’t know your situation - but it...
  15. T

    sevice manuals

    The new model for PR1 is 10-21
  16. T

    Borg Warner info

    The new models for PR1 is 10-21!
  17. T

    Takeuchi TL130 Replacing the Hydraulic Suction Strainer - in the tank filter

    That oil will shoot out right away, unless you also disassemble the charge filter ( mounted to the wall on the left side underneath the seat) - in that case I would disable the fuel, and crank the engine until the oil will show up at the rear pumps case drain port - shown on the picture.
  18. T

    Borg Warner info

    I can use Google also! If asked the question - it means Google didn’t turn up anything useful for me.
  19. T

    Borg Warner info

    Does anyone have any files that they can share on Borg Warner PR1? I can only find the paper back on e-bay, which is fine with me, but it’ll take time to get here. And that thing is on only one forklift that can lift high for the whole company. And if anyone can suggest who is still sell...
  20. T

    sevice manuals

    Does anyone have any files that they can share on Borg Warner PR1? I can only find the paper back on e-bay, which is fine with me, but it’ll take time to get here. And that thing is on only one forklift that can lift high for the whole company.
Top