• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Case CX130 trackpads

    looking for new or used 24" triple grouser pads.
  2. B

    CX130 trackpad sourcing

    I have a new to me cx130. Need new track pads and bucket bushings etc. this is for farm use so pretty low hrs will be put in it. Where is best place to source new track pads etc without paying too much. I have price with AMS but wanted to see other recommendations Thxs.
  3. B

    International 4300 DT466 engine issue

    I have a '05 DT466(not Maxxforce), that I use as farm truck and hauling gravel etc. for farm roads, and is a great truck. I have been running gravel up a steep grade and yesterday engine ran hot before coming downhill, just below 230deg F, it cooled running downhill no problem. At the bottom of...
    • Bearhead
    • Thread
    • dt466 injectors dt466 rough
    • Replies: 7
    • Forum: Trucks
  4. B

    Deere 550H transmission pressure loss

    I was running my 550H in the dark and ran into a stump in 4th gear. Lost all gears and transmission gauge reads close to zero. I check underneath and didnt see any huge amounts of oil leaking out, but it was dark and I had to leave for other tasks. The machine is not in a user friendly area:(...
    • Bearhead
    • Thread
    • 550h 550h drive loss deere
    • Replies: 3
    • Forum: Dozers
  5. B

    IHI 55N3 tracks

    I have a IHI 55N that is a fantastic machine, and its time for new tracks. It never gets used on concrete/asphalt and mainly used in clearing bush etc. Would steel tracks for a good option for this 6ton machine, the terrain gets pretty steep and I have been impressed with the rubber tracks grip...
  6. B

    Galion 500C broken blade circle gear

    I managed to break a tooth and chip some others off the cast iron blade circle gear on my seldom used grader, to avoid the hassle of removing the whole gear and taking to machine shop, could I build this tooth up with stick welding and shape with a die grinder? Would it be strong enough. My...
  7. B

    Kubota SVL75-2 intermittent lockout

    I have a new to me '17 SVL75-2 with 750hrs and a brand new engine(previous owners fault), when driving in tight areas or backing up etc it will intermittedly lock out, and I have to change the rpm's most times to be able to unlock it again. A second issue I have is that when using a root...
  8. B

    Vermeer BC1800XL John Deere infeed

    I have a new to me Vermeer chipper with the John Deere diesel. The engine warning light from the ECU is lit, although all is good, and with this on,Vermeer the infeed roller system will not function. Is there any way to clear any codes in the ECU without having to take to dealer or owning the...
  9. B

    Galion T-500C wiring diagram schematic

    Im troubleshooting various circuits on my 500c, will be way quicker with a schematic. Anyone have a link, I can buy a shop manual online for $73 but only need the schematic, so would be expensive to buy for that. Thanks
  10. B

    International 4300SBA transport dimensions

    I bought an International 4300SBA 10; dump truck a few states over and have a cheap shipper and need approximate dimesions for the shipper, anyone have app dimesions? I have checked the web and cant finy any and no-one at location to measure. Any help is appreciated.
    • Bearhead
    • Thread
    • dumptruck transport dimensions
    • Replies: 1
    • Forum: Trucks
  11. B

    Sage advice needed re JCB backhoe and the dealer support

    Need advice here, i bought a 2012 JCB 3CX with 2300hrs backhoe over two years ago from big brand rental auction, the machine has worked well and hard. Lost 2nd gear fwd a while back from too much abuse uphill underload, so eventually decided to pull the box, rebuild it and refit it, but I did...
  12. B

    Wanted JCB 3CX transmission

    Looking for used 4 spd powershift transmission
  13. B

    Deere 550H Hydrostatic issue

    I have a 550H that runs really well. Sometimes when I work it hard and shutdown, come back to restart it, it will start but no go into gear. Park brake light goes off, but tranny controller says park brake. If I leave it an hour or two it will work just fine. Any help would be appreciated.
    • Bearhead
    • Thread
    • deere 550h hydrostatic
    • Replies: 1
    • Forum: Dozers
  14. B

    JCB 3CX4T powershift no 2nd gear in fwd

    I have a 2012 JCB Powersift 3CX4T 4 speed fwd and reverse, electric solenoid control. I do not have 2nd gear in fwd, or 4th(I think 4th needs speed control and I dont have the space for the speed test). In forward I have 1st and third, reverse I have 1,2,3,4. The column selector lever was...
  15. B

    Midi Excavator boom keeps lifting

    I have an IHi 55N3 (5 ton) that has hydraulic controls(not electro hydraulic). Was digging and the boom started lifting by itself. When pushing control to lower, it will eventually slow its lift and then stop, and then one can make it descend. As soon as one applies any lift/raise function, it...
    • Bearhead
    • Thread
    • excavator;boom lift; hydraulic ihi ihi 55n3
    • Replies: 10
    • Forum: Excavators
  16. B

    JCB bucket

    i have JCB 3cx 2012, with regular front bucket. Ebay has 4in1 bucket a few hundred miles away, and checking if anyone knows if the 3cx and 214 share the same front bucket config
  17. B

    JD 550H winch needed

    I recently bought an '04 550H LGP for work around our property in NC. Looking for forestry package, limb risers and winch with controls. If anyone hears anything please let me know. Thxs
    • Bearhead
    • Thread
    • 550h forestry winch
    • Replies: 0
    • Forum: Dozers
  18. B

    New to forums

    Hi, bought 280 acres near Boone, starting to look for dozer to clear up logging roads and make new roads, as well as clearing areas. Will be asking advise as I get into this on what machines are best suited, most likely max 30,000lbs. Budget is the biggest deal, need a winch as well. Hydrostatic...
Top