• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    John Deere 644k wiper motor

    found the issue.. one of the cab lights was drawing to much current.
  2. J

    John Deere 644k wiper motor

    have an issue with the front wiper motor, seems to only work when you use the sprayer function. the intermit slow and fast function don't seem to work, the lights on the control panel all light up and the fuse appears ok. rear wiper works as it should any thoughts .. thanks
  3. J

    G960 trans fluid level

    Update engine oil has increased as well not coolant.
  4. J

    G960 trans fluid level

    G960 Grader, transmission fluid keeps dropping from site glass, no visible signs of leaks on the ground or in the skid plate area. thoughts on where it may be going. thanks
  5. J

    Black smoke

    thanks checked that out and everything appears to be as it should be. will send it off to dealer thanks for the help
  6. J

    Black smoke

    2791.13 was the EGR code. replaced EGR, removed the cover as well and it wasn;t to bad inside. cleaned that up. still heavy smoke and idling rough
  7. J

    Black smoke

    have a John Deere 644k black smoke constantly coming out of exhaust either cold or hot, rough running. there was an egr code replaced the EGR that error is gone now but still smoking and running rough. replaced fuel and air filters as well. any direction from here? could it be injectors? thanks
  8. J

    manitou 50-4

    we have this forklift and all the red lights are on the instrument panel. and buzzer is going off.. have no idea what the issue is. the unit starts and still functions normally. thanks in advance
  9. J

    horn like sound when engine revs

    found issue was the actual turbo thanks for the tips
  10. J

    horn like sound when engine revs

    John deere 644k, when the engine is revved up, there is a loud horn type sound coming from the engine compartment. no codes, coolant level full, replaced air filters thinking maybe one was collapsing. Don't see any clamps off anywhere. any suggestions? thanks in advance
  11. J

    Mustang 2041

    Am having an issue with this skid steer. the unit comes to a complete stop without any warning. only seems to happen after about 30 minutes of use and opening and closing the door, moving the seat bar up un down doesn't make any difference. tried turning the park brake switch on and off but...
  12. J

    Park Brake- John Deere 444H

    ok, the filter is new changed it a week ago, removed the line as described and capped ends, rpm @ 1500 pressure reads between 210-220 psi fluctuating at idle its 150-160 psi, the brake pressure light flashes off and on once in awhile as well
  13. J

    Park Brake- John Deere 444H

    this morning, pressure at 1500rpm is 210-215 psi in neutral, at idle it's sitting at 140-150 psi in neutral, trans temp was at temp
  14. J

    Park Brake- John Deere 444H

    at operating temp the pressure, read off the front of the transmission is 190 psi when put into gear.
  15. J

    Park Brake- John Deere 444H

    ok finally had a chance to get back to this loader hooked up gauge to the supply line coming off trans to ebrake block, cold pressure around 200 psi, after running it for about half and hour the issue starts acting up pressure now at 150psi mark, fluctuates a little when i press the switch to...
  16. J

    Park Brake- John Deere 444H

    i haven't checked brake pressure, when the stop light flashes the park brake light is on at the same time. no other lights appear when issue happens. as for the codes only one that is recent is code 0386 but that tripped about 40 hours ago.the next recent one is 1653 and that tripped 500 hours ago.
  17. J

    Park Brake- John Deere 444H

    its running steady at 27.9 volts
  18. J

    Park Brake- John Deere 444H

    serial number DW444HX564060 tach is showing rpm, it seems like if they hit the hydraulic disconnect switch and turn it back on and then push the park brake switch then touch the throttle it will disengage. i have replaced all the filters thinking one may be restricting but not the case.
  19. J

    Park Brake- John Deere 444H

    as soon as someone comes and tries the unit again, i will advise thanks
  20. J

    Park Brake- John Deere 444H

    Same issue is back again park brake does not want to release when unit is hot, stop flashes on the dash buzzers sounds, have replaced solenoid and the pressure switch on the manifold. sometimes when you rev the engine up it will release, or let it sit turned off for 15 to 30 minutes and it will...
Top