• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. X

    Caterpillar 907H inching pedal rheostat?

    SJM 46 8 I'm having trouble creeping, stopping, and changing direction while running the engine at high idle. Rim Pull rheostat seems to make no difference low or high. Creep rheostat works as expected, however any bit of speed seems to not be scrubbed by the inch pedal. This loads up the...
  2. X

    Caterpillar 907H fuel priming strategy

    S/N SJM1 I changed the filter, but did not receive automatic priming via the electric fuel filter mounted pump. Assy 232-5877 I've found this system to work ok on other equipment equipment of the era, and seems like there is a 10 second timer in the ignition on position for this purpose. I've...
  3. X

    907H Ride Control Accumulator Replacement

    S/N SJM00462 I noticed that the ride control is activating, but the effect is minimal. I observed that the accumulator was marked 270 psi, so I went to check it with my 300 psi "Fox shocks" air hand pump. As soon as the chuck was fitted, the gauge surged back to the 0 stop, bent the needle, and...
  4. X

    Customer experiences with RS industrial engines Houston

    Has anyone on this board placed an order, and been satisfied with this outfit? I've found them through an ebay listing for a motor I'm after. The price seems to good to be true, and they don't take credit cards.. This raises two red flags for me in buying sight unseen.
  5. X

    Tier 3 FIAT F5CE5454 oil breather.

    I think that Google turns up that this engine is used in CNH case and new holland equipment, like the W80B L190 or TR340. The one I have, installed in a w80btc, has "fouled" and put a bunch of oil into the intake. I unhooked the hose to the intake, dropped it out of the engine bay, and ran it...
  6. X

    CAT 279C2 no High Flow

    S/N KWB01063 with HIGH FLOW XPS Jumper Plug P/N 2413763 Both 15A fuses in the hydraulic cylinder slots in cab fuse panel are good. The operator manual has very little information on how this system works, so I'm mostly putting snippets together from Google searches. Initial testing was done...
  7. X

    279 C2 battery icon with work lights on

    S/N CAT0279CAKWB01063 I can run with the front lights and heater fan on, but when the rear lights are switched on the battery icon illuminates. The lights are not going dim after a period of time, so I suspect that the info panel is what is experiencing the voltage drop. Are there common...
  8. X

    279 C2 manual quick attach upgrade

    Has anyone successfully converted a manual lever quick attach to either electric or hydraulic pin actuation? On my forks it's a pain to get them tight against the coupler and be able to get the cab door open.
  9. X

    2019 Volvo L25H emissions

    Hello folks, there is not much info on this model on the net, so I can assume that the unit is fairly trouble free. However I do see that the Kubota SVL get a very bad rating on the emissions end. This loader was supposed to be better, as it is the Kubota engine (V2607) but with only a D.O.C...
Top