• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    need help with a genie gs-1930 scissor lift

    Thank you for the info. I'm getting close. I don't know how to check flow and don't have a pressure tester. I removed the lift circuit valve and cleaned it out. Then tested lift with no real improvement. I discovered that if I disconnect the + wire from the H coil and touch it momentarily to the...
  2. R

    need help with a genie gs-1930 scissor lift

    Update of sorts. Confirmed pump is operational by disconnecting output (to manifold) and running straight into reservoir. With hydraulics connected I also disconnected + wire from Lift Circuit Solenoid (on Manifold) and activated ground lift. Pump cycled freely with flow. When I reconnect + wire...
  3. R

    need help with a genie gs-1930 scissor lift

    I hope so. Broken wire sounds easy. Now to figure out where a lift coil is. Is that on the hydraulic function manifold or on the lift cylinder itself?
  4. R

    need help with a genie gs-1930 scissor lift

    Both ground and platform controls have the same effect; pump activates and lifts platform a few inches, after which the pump sounds like it's loading up. To me the fluid path is blocked somewhere
  5. R

    need help with a genie gs-1930 scissor lift

    Hello All, I have a Genie 1930 Scissor that is not lifting and showing no codes. Hydraulics working fine on the wheels (turning); so it's not the pump. Electric wheel drive is good for moving around. Flooring is flat smooth slab. When I activate lift the pump runs and there is a few inches of...
Top