• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. DougC

    Sorry for the long delay but our transmission was shot. There is a washer that can cause the...

    Sorry for the long delay but our transmission was shot. There is a washer that can cause the forward functions not to operate.
    • DougC
    • Profile post comment
  2. DougC

    Terex SS1048C Slow Boom

    It is a 2002 Terex SS1048C with John Deere 4045. It has Rexroth pump and David Brown main valve. Not sure if that will help. There aren't any leaks as far as hydraulics except for one small leak at a fitting on the main valve.
  3. DougC

    Terex SS1048C Slow Boom

    This unit was purchased used at an auction. It has been worked on before, obviously. This unit takes a bit of running before boom controls are active. At that point, they respond and operate very slowly. In addition, the brakes won't release until it's run some more. I replaced the control block...
  4. DougC

    Rear Sway/Lock-Up Cylinders are..locked up

    Thanks, Knepptune. I have found some troubleshooting in a manual off of genielift.com. I have checked for power at the limit switch and that is working. At the solenoid, there is supposed to be no power unless the boom is over 60 degrees. That is also good. The valve is not supposed to be...
  5. DougC

    2008 SkyJack SJIII 3226 S/N: 27003905

    Not sure where to post or if it is allowed on scissor lifts on this forum so please excuse me if I am doing any wrong. On this lift, I found metal in the hydraulic oil filter. I replaced the pump thinking that must be what was going bad. When operating the lift in forward or reverse, it whines...
  6. DougC

    Rear Sway/Lock-Up Cylinders are..locked up

    I cleaned the limit switch on the boom and its contacts. I raised the boom until the sway control button no longer worked and then lowered it. The boom is pulled all the way in. I have been using the manuals on the site for our Terex and Genie telehandlers and it is a great source of information...
  7. DougC

    Still learning hydraulics

    Still learning hydraulics
    • DougC
    • Profile post
  8. DougC

    Rear Sway/Lock-Up Cylinders are..locked up

    I am still new to the wonderful world of hydraulics so please bear with me. I have a 2002 Terex TH1056C S/N: 024354. When operating, the right front and left rear tires will not maintain contact with the ground. I have found that the sway cylinders in the front are working as they should be but...
  9. DougC

    Case 586E No Forward

    Thanks for your help sheepfoot. Still learning on these old Case monsters I have to work with here.
  10. DougC

    Case 586E No Forward

    I'm new here and haven't found information on any other thread for this exact issue. Equipment number is 17019956. Not sure if that helps any. I have a Case 586E forklift and it has reverse but no forward gears. Forward won't really do anything in any of the 4 gears. Fluid is not low. The...
Top