• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. N

    Takeuchi tl130 electircal loss

    Now I'm getting 12 bolts from all the way from the relay to the fuel shut off solenoid until it kicks off. The smaller yellow wire going into the same wiring relay shows 2-3 volts until it kicks off then it goes back to 12 volts
  2. N

    Takeuchi tl130 electircal loss

    I checked voltage at the fuel shut off solenoid. On the yellow wire I only get around 2 volts when the key is turned on then it cuts to nothing
  3. N

    Takeuchi tl130 electircal loss

    Nathan1143@hotmail.com
  4. N

    Takeuchi tl130 electircal loss

    At first we thought we had a bad ground The machine ran fine for about a day and now we're back to square one as it will not start again
  5. N

    Takeuchi tl130 electircal loss

    I'm still having a loss of power to the fuel still shut off solenoid. When the key is turned on approximately 1 to 2 seconds power is lost at the fuel shut off solenoid. I have swapped relays and determined that they are not at fault. Any suggestions ??
  6. N

    Takeuchi tl130 electircal loss

    Is there any other fuses on these machines other than the small fuse panel at your feet? I've lost all power while repairing a faulty ground to the ignition switch. Battery checks good but fuse panel is not getting power from the battery. Cant find a main inline fuse or breaker anywhere. Thanks
Top