• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. alaa

    Perkins 2800 series need to run at 900RPM

    usually we use to decrease the RPM when we go to start testing the injectors cutout test also some company they ask to start the engine after finish major overhaul. That's why I need to change the rpm
  2. alaa

    Perkins 2800 series need to run at 900RPM

    Hi Guys, How do I change the speed RPM on peekins 2800 series Generator by ETS or anyways from 1500 to 900RPM? Perkins 2806-E18 Thanks
  3. alaa

    Guys I have some doubts can you help me

    Actually India is one of the powerful countries in production and manufacturing in the world and no one can deny this. Through my experience in this field of heavy equipment, especially in caterpillars that made in China, I did not see any defect in them.... but the cylinder block, I think...
  4. alaa

    Guys I have some doubts can you help me

    Thanks a lot bro... The reason is the paint wasn't good .... and that's why i asked if it's new or refurbished. This will help
  5. alaa

    Guys I have some doubts can you help me

    Hi All I have doubts about these engines serial number c15 lxl01690 arg no 5787141 c18 lxe00829 arg no 5824149 c18 lxe00821 arg no 5824149 If they were new or refurbished Thanks a lot
  6. alaa

    During "Cylinder Cutout Test" At 3508b series ....

    Thanks for reply The problem for 6 injectors I took just picture to show you guys the problem how it Active or come ? I agree with you Niga about the temp exahust sensor that could be doing fluctuating in cold weather,but not with injectors Open circuit. The exhaust temperature sensors missing...
  7. alaa

    During "Cylinder Cutout Test" At 3508b series ....

    Yes, it can hold the load But at cold weather suddenly start fluctuating rpm/frequency and C/B cut the power to the load. Do you think guys the Exhaust Temp sensors has relation with this problem L/R missing from bginning. Thanks guys
  8. alaa

    During "Cylinder Cutout Test" At 3508b series ....

    Thanks Engine SN: 1FZ03430 I never tried to use Multiple Cylinder Cutout test one of my friend got broken in one cylinder and valve with rocker ,only I use single
  9. alaa

    During "Cylinder Cutout Test" At 3508b series ....

    Thanks guys, Before we start troubleshooting this problem ,The Generator fluctuating at coold weather ..... With 40% of load The ET working good I tested It with different Generator same series... I Asked to change the inside harness for each 6 cylinders are the problem but 3 & 8 are good no...
  10. alaa

    During "Cylinder Cutout Test" At 3508b series ....

    No one has passed through this problem from before Come on guys
  11. alaa

    During "Cylinder Cutout Test" At 3508b series ....

    Hi All, Why when I use Cylinder Cutout Test at the same time of the same injector Getting open circuit,But If I go to Use the "Injector Solenoid Test" to diagnose an open circuit or a short circuit Nothing Happened every things is normal? I tried to clean the connector and the the wire loss on...
  12. alaa

    Caterpillar 950G series II

    Thanks Gents I will do that
  13. alaa

    Caterpillar 950G series II

    Hi Gents, the Wheel Loader working in hot climate,So I would like to disable the Air inlet heater relay does the cat ET can do that from the ECM ? Thanks
  14. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    Ok
  15. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    Ok , but If it's not grounded the power that is mean v-ecu problem or I-ecu
  16. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    Is Active but 187no-signal
  17. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    black LCD display
  18. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    Thanks yes,will help for test, is there any test instruction will help to check the VECU if work or not As per Mr funwithfuel said Thanks All
  19. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    Thanks All for reply Yes,fuel gauge not showing the level,Is it will Answer that is VECU Problem. can you help me with any test that is prove that VECU gone. so the speed selector switch will not work while the Emergency Engine control speed switch is Active. Is this Emergency Engine control...
  20. alaa

    Need Wiring Diagram for Volvo EC210 BLC

    Hi I have Volvo EC210B LC and I need wiring diagrams from Engine control speed switch to Emergency Engine control speed switch the engine not working from selector auto 1.2.3 if you move to 2 and 3 it's immediately shutdown if I move to manual will work to hi speed can you help the diagram to...
Top