• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Jumping out of gear

    Hello Nige...i have the serial # will post
  2. D

    Jumping out of gear

    I think youre correct....its related to the parking brake
  3. D

    Jumping out of gear

  4. D

    Jumping out of gear

    The mechanic supposedly replaced the cable...my son runs this loader so im gettin my info from him...we both run loader at APAC Asphat in Okla...he did mention this started after the parking brake was worked on.
  5. D

    Jumping out of gear

    Im wonderin if there is Sensors or relays that could cause the tranny to disengage..but seems to be related to the FNR since tapping on it will engage the tranny eventually.
  6. D

    Jumping out of gear

    It is a 980G
  7. D

    Jumping out of gear

    We have a Cat 980M that quite pulling...it happens under load..not under load but after tapping on the f-N-R switch it will engage...the switch was rebuilt today but after 45 mins it disengaged....any thoughts would be appreciated
  8. D

    D4H2 TANSMISSON FLUID

    Its been a battle with this tractor...Cascade dish washing liquid finnaly did the most good with the radiator..I'm convinced the previous owner had put pond water in it...it was still heating up and losing coolant..finally found the culprit..a heater hose at the heater core had 4 clamps and...
  9. D

    D4H2 TANSMISSON FLUID

    Is 210 f acceptable on a warm day for the torque converter..radiator is staying between 180..200 dg...big improvement from last summer...havent set the buzzer off.
  10. D

    D4H2 TANSMISSON FLUID

    Thanks...glad I ask..
  11. D

    D4H2 TANSMISSON FLUID

    A spelling lesson needed also..long day
  12. D

    D4H2 TANSMISSON FLUID

  13. D

    D4H2 TANSMISSON FLUID

    I am needing to add fluid after a hose break...I'm thinkin a high quality HTB fluid is ok..any help will be appreciated.
  14. D

    D5H 6-way blade lift issue

    I had another problem with my 4h that was solved in a way I would of never thought would work...radiator was plugged ..tried several commercial cleaners...again HEF saved me..Cascade dishwashing liquid did a excellent job of cleaning..I was on the verge of pulling the radiator .
  15. D

    D5H 6-way blade lift issue

    I know it sounds like a too good to be true fix..I had posted here and had several suggestions..thought I would throw my good luck cure out there...and it being a reacurring problem ...especially if I'm working in creek bottoms ..lot of moisture.
  16. D

    D5H 6-way blade lift issue

  17. D

    D5H 6-way blade lift issue

  18. D

    D5H 6-way blade lift issue

    I had the same issue with my D4H2...checked all the linkage..all seemed ok...by chance I sprayed all the linkage with WD 40...I was surprised with the result...every so often I have to repeat when functions start getting slow...thought I would mention this since it sounds identical to the issues...
  19. D

    Case 850D final drive

    If I'm not mistaken there is a B in between the 1150 and 1150 C...I had a lot of trouble with the angle setup on both..didnt care for the slide on the c frame..lot of hyd tubing and hoses..not good in brush.The C had hyd pitch.
  20. D

    Oil leak on a D4H2

    I was sweatin it when I dropped the front pan...afraid of what I was going to find...it wasnt as bad as the rear pan under the transmission..I found a couple of wrenches that weren't mine so it had been a while since it was down. Warning is recieved.
Top