• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    backhoe for a Takeuchi CTL?

    That is one of the most disappointing powered earth movers created, very hard to be steady or precise and very little capacity till you need to move which is a difficulty all its own. By its nature it is single pump and every function affects the others. Would not recommend to dig footings or...
  2. D

    Help needed please

    Should be on the valve cover on the end closest to the fan.
  3. D

    Bobcat V519 Joy Stick Dead Spots

    If this is pilot hydraulics, check your knuckle between your valve and your handle. When that wears out it is almost impossible to feather with one hand but you might be able to by holding it steady with one hand tapping it forward with your other hand. The knuckle should not be the issue on...
  4. D

    Looking at new jumping jack compactors any comments on what your thoughts are on various brands?

    Had a 4 cycle Stone, now have a 2 cycle Bomag. Much prefer the Bomag
  5. D

    Specs all over the place on simular machines.

    I was told (by the dealer, consider the source) that that QCs are standard on the Yanmar so they lose some leverage on the charts because most other brands get their ratings without the QC. I would definitely give Yanmar a chance, my friend has one and breakout has never crossed my mind while...
  6. D

    320 JD skidsteer hyd lock up issues with code F9H9

    Check the wires that go to your seat switch and seat belt, those are susceptible to getting pinched and will generate that code.
  7. D

    Trying to source a new or used (but working) Torque Motor

    I don't know where in New York you are but I can recommend this company. Empire Hydraulics & machine, 13428 Victory Lane, Adams Center NY 13606 315-284-4012
  8. D

    Recommendation for Vibratory Post driver with grapple - one man operation?

    Montana Post Driver. Vibratory post pounder used by quite a few people in this area. Will put a 4" heavy wall pipe through 5" in concrete floor.
  9. D

    12-16 ton dump trailers

    Brakes on the trailer make a huge difference. I have a John Deere. Most of their ratings in the U.S. are based on the assumption that the trailer does not have brakes. Mine being imported from Europe has the trailer towing option which gives you an auxiliary 5 gallon oil tank for the trans...
  10. D

    Komatsu pc50

    PC-50 covers a lot of models, do a google image search on a PC- 50uu-1 and a PC 50uu-2. I am assuming you can't post pictures yet as a new member, if you can post pictures that would be helpful. The uu-1 I am not very familiar with but it would have 90 degree corners on the covers and shields...
  11. D

    Komatsu "Four" (safety) System

    I am going mostly off memory from 5 years ago. can't remember if there is 4 spools or 3 on the valve but you will be looking for a valve bank under your right foot when you are in the seat and it should have 9 maybe 7 hoses going to it with 3 or 4 electric solenoids on top of it. Got to run ...
  12. D

    Komatsu "Four" (safety) System

    https://www.discounthydraulichose.com/thread-identification-tools-96769.html If you go to this site it will allow you to download a guide to figure out which fittings you have. You will need 4 of a fitting that looks like this part # Part #: 2403-06-06 and 1 of these Part #: 2408-10...
  13. D

    Komatsu "Four" (safety) System

    My machine is a ser. 9945 . According to my repair manual the main difference between mine and yours would be mine is a gear pump and yours could have a variable displacement ( hydro style ) pump. Your pilot system should be the same. I got mine reasonable because the prior owner was having the...
  14. D

    Komatsu "Four" (safety) System

    I have a PC-50 also. The system can be very problematic to say the least. i ended up bypassing the control spool. Then it is operator skill to keep from hitting the cab. (: Your control spool is under the floor of the cab and has 9 hoses going to it IIRC . Splice the 4 on one side straight...
  15. D

    Manual for the KOMATSU PC50UU

    Manual If you don't mind could you forward that manual to me also. I just purchased one myself. dutchlandfoods@gmail.com I would appreciate that very much. Thanks again! PC50uu-2
Top