• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    ts14 transmission ?

    I would appreciate finding out where I can get parts. Thank you.
  2. B

    ts14 transmission ?

    I would appreciate it if I could get info of where to get parts. Thanks.
  3. B

    ts14 transmission ?

  4. B

    ts14 transmission ?

    Sorry for the deceiving picture. The load is dry manure and was loaded with a loader. Now this allowed me to watch transmission temps because I would load the scraper with a loader while the transmission cooled, then run for 10 minutes to unload and shut off for about 1 hr.
  5. B

    ts14 transmission ?

    Thanks for the replies. My problem is that this transmission runs almost twice as hot as the rear transmission. I use a snap on IR thermometer on exactly the same spot on both transmissions and the front trans is around 200*f . I decided that the front trans may have to much oil. I drained the...
  6. B

    ts14 transmission ?

    Yes, I am trying to find out how much oil goes into this transmission. The front trans dipstick is a different length than the rear trans dipstick and both have been remarked with grinders. There are no pipe plugs for oil level. This is my machine I purchased at rb auction. Auction means...
  7. B

    ts14 transmission ?

    I am wondering if anyone knows how much oil goes in to an Allison 4 speed forward 2 reverse transmission. I would like to fill it up then see where the level is on the dipstick. This is on a ts14--7uot. Has a 671 up front with the 4 speed. Allison model CLT 3441-1
  8. B

    Torque hub ?

    Sounds logical, I was thinking to thick of shims inside. Picked up this machine at rb auction in 2016 and just got around to looking into the hubs. This one was siliconed inside and out and still leaked.
  9. B

    Torque hub ?

    What would cause these cracks on this cover? Thinking about v the outside cracks and weld or use JB weld. Notice no markings on the tag, anyone be able to guess a model number. Thanks. 1997 Genie Z 45/22 with a kabota motor
  10. B

    test 2 pics

    test test thanks, now what?
  11. B

    Re-lining parking bake with Pliobond?

    If it was mine I would be drilling and using brass bolts, had a few electric brakes that the linings glue let go. The pic with the lining around the drum should have more space so the ends don't touch when the lining wears. My 2cts.
  12. B

    Genie electrical ?

    Thanks, I was using a heavy paper clip and it was bending. Was scared to break something. I used a small screwdriver and pushed hard till the wire came out.
  13. B

    Genie electrical ?

    Hi everyone. I joined here cause I bought a genie Z45/22. What is the proper way to remove and install wires on the terminal block in the ground control panel? Thank you.
Top