• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. H

    komatsu parts

    Well I am really glad I asked for help, the results were much better than last time I got myself into this. The shop wouldnt do the add a ferrel and crimp but what they did was braze the fittings onto their fittings which worked magical. I got out the door for 300 bucks, 100 bucks each which is...
  2. H

    komatsu parts

    I agree totally. Pulling cedars like carrots and shaking off the root balls vs grinding up and leaving all that material on the ground is like night and day. Minutes later its like they were never there. The video was in Florence Tx. I will be posting an update on the hoses soon, it will help...
  3. H

    komatsu parts

    I got 3 hoses pulled, one to the manifold and the big hoses on the right and the left of the left stick. I sure hope they can make something work cause these fittings look quite expensive. I will ask the same shop. Thanks for the info
  4. H

    komatsu parts

    Went out and pulled the bad hoses. Will take them in. Do you know what the cylinder pack rebuild kit for the bucket part number is and where to get it? I have lost a bunch of fluid when this hose blew and think it would be smart to rebuild that leaking cylinder before I fill it back up with...
  5. H

    komatsu parts

    Well the 4 hoses came in, I was worried about the end that has the quick disconnect, and the hose that came in doesn't have the spring disconnect, it has some pipe like jic flare connector. If I can match up the quick disconnect that fits in the manifold I will be able to make these work. But I...
  6. H

    komatsu parts

    Great information thanks! I guess I dont have the same manual you have, I will do some more looking. Im not even sure where the swivel joint seals are located. I bought this unit from a pipeliner, it has 13k hours on it. I have a grapple on it, use it for pulling cedar trees.here is where I was...
  7. H

    komatsu parts

    I didnt even think about needing to replace the hoses that feed the manifold I was just thinking about the hoses that go from the manifold, thanks for that. I will try to get a email communication going there unless you have a name that is familiar with the wrong hoses that I can ask for. Have...
  8. H

    komatsu parts

    Your describing the exact hose I am talking about. I bought a couple last year and tossed them. Bad idea wish I had posted. It has the little spring wire that holds on to the manifold. I dont think it goes all the way to the control lever I think there is a coupling in the middle. Im fixing to...
  9. H

    komatsu parts

    its some kind of quick disconnect on a manifold that I think goes to the stick or at least routes to it. Thanks for both of your information I will research both options. If I could just get the hose portion replaced I could get all the hoses replaced for a fraction of what WP wants. Thanks...
  10. H

    komatsu parts

    Anyone recommend a komatsu alternative? I have a pc200 -6 I need hoses for and suprisingly cannot find a supplier on the interweb. HydraulicsExpress looks like either a con or out of business. They list the part I am after for 100 vs 300 but the website stuff and facebook stuff is 4 years old...
  11. H

    Komatsu excavator 6 series monitor problems - LCD not visible

    http://www.aliexpress.com/item/Free-shipping-via-DHL-excavator-display-screen-SINGLE-TIME-Excavator-monitor-LCD-panel-apply-to-Komatsu/1419289646.html?spm=2114.13010608.0.62.zHUQuB This is the guy I got that chip from. would have been perfect if it went to mine :)
  12. H

    Komatsu excavator 6 series monitor problems - LCD not visible

    I bought the chip but it didn't go to my screen. I ended up replacing it with an ebay special. It felt a little cheasy but has been working great. The difference of being able to see the stuff is the speed buttons now work so it isn't stuck in the slow speed. The picture attached is the chip...
  13. H

    Pix Blue Kevlar Belts

    Can anyone give feedback on this brand in a banded belt like 8vk size used in a rock grinder or horizontal recycler? 4 or 6 banded? How did it hold up vs poly? Thanks!
  14. H

    Komatsu excavator 6 series monitor problems - LCD not visible

    I am an electronics wiz, complete with desoldering tools. (not to be confused with solder sucker or wick) What did you replace? Right now since it doesnt affect how the machine runs its not a big deal but am courious what you figured out to replace and how much work it is to get to.
  15. H

    Komatsu PC200EN-6

    Sorry it wasnt correct. Good luck!
  16. H

    Komatsu PC200EN-6

    PC200-6 Should get you there
  17. H

    Thoughts or things to look for on a komatsu pc200-6 excavator

    Thank you both for your information. I look forward to ridding Texas of numerous cedars in the near future!
  18. H

    Thoughts or things to look for on a komatsu pc200-6 excavator

    Your reply is oposite from what he was told from the dealer if I am reading the posts right. He said if this komatsu had an orange pump on it that it was probably an ok machine -The Orange pump is probably a KYB or Kayaba pump. Horrible design and troublesome. The gray pump is a...
  19. H

    Thoughts or things to look for on a komatsu pc200-6 excavator

    Specs can be found here http://www.ritchiespecs.com/specification?type=&category=Hydraulic+Excavator&make=Komatsu&model=PC200-6+CUSTOM&modelid=93047 I just bought the grapple and the machine for clearing cedar it seems to be pretty magical. But I have not used it on a job yet. I will...
  20. H

    Thoughts or things to look for on a komatsu pc200-6 excavator

    I just bought this model from a utility installer. 12k hours. Monitor is out, but it runs fine. I really like the fact it has a cummins in it, and it is impressive for strength. I got it for 20k and i put the grapple on it.
Top