• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    jcb 212s axle oil

    You sent me the links a while back and I still use them sometimes so thanks for that it's a 04
  2. D

    jcb 212s axle oil

    Couple questions with a jcb 212s does the hub and the axle use the same gear oil, I also saw that it must be compatible with the emerged breaks, can anyone recommend an oil that would be comparable to jcb brand product. Also I've diagnosed a bad transmission oil pressure sensor a little while...
  3. D

    Dsiss3@aim.com thanks

    Dsiss3@aim.com thanks
  4. D

    JCB 212S Hydraulic issue

    Who can tell me what the transmission pressure should be? Thanks
  5. D

    Hey Greg could u hook me up with the 212s Manuel, thanks

    Hey Greg could u hook me up with the 212s Manuel, thanks
  6. D

    Jcb 212s won't start

    Got my new starter in and decided after all I heard to not do it myself and called my diesel/hrydrulic guy and was surprised when he called 1 1/2 hours later saying it was done. All he had to do was remove fuel filter housing and trans dip stick. I was beyond amazed. Best 75 bucks I ever spent...
  7. D

    Jcb 212s won't start

    Ok also where's the best place to get one online
  8. D

    Jcb 212s won't start

    Drain hrydrulic fluid ?
  9. D

    Jcb 212s won't start

    Yea any tricks on gettin it out. Through the bottom or out the side motor skirt
  10. D

    Jcb 212s won't start

    Figured the fuel issue out was the filter just had some trouble with a air leak and couldn't get tank to pick up in sediment bowl. Now after testing the starter I know it's time for one. over the Internet what's my best option? Or should I get this one rebuilt? Best way to take it out? Do you...
  11. D

    Jcb 212s won't start

    Ok I filled the bowl but it just drains it down and I can't get it to pick up on the tank. I can't figure out what I need to do to injection pump. It mentions a priming level but I don't see one
  12. D

    Jcb 212s won't start

    Yea the one on the side of fuel tank.cant get it to fill but but can hear a gurgle in the tank when key it turned
  13. D

    Jcb 212s won't start

    Finally did some testing. Main power wire from seliniod to starter and grounded on start once craving started at 4 ,6,7,8, and pegged at 9ac. No 10. Tested ground of seliniod and power on seliniod and it read 12v at all times read 0 when cranking. Battery tested At 13dc touched 14 once. Got my...
  14. D

    Jcb 212s won't start

    These are 12v I'm certain right not 24v
  15. D

    Jcb 212s won't start

    Seems like it's getting to much power
  16. D

    Jcb 212s won't start

    Also realized it's the power wire that's coming off the seliniod going into the starter that smoking and gettin hot not the ground
  17. D

    Jcb 212s won't start

    My filter is all black screw off bottom half with a lift pump on top. I messed with all ground and machine is turn over faster but it seem my starter is getting hotter more smoke and ground hooked to seliniod was glowing red and caused a small flame. With old battery is wouldnt do that new one...
  18. D

    Jcb 212s won't start

    Yea when the machine quit alarm came right on. Today I drained water separator didn't see at water so clean fuel. But it didn't have much of a flow. Also noticed lift pump never shuts off no matter how long a let it sit with key turned. Still have to get a filter. Checked the fuel shut off and...
  19. D

    Jcb 212s won't start

    Does any one know if there is any safety's the will kill the machine if any guilds are to low? Or any way to check what the alarm is going off for
Top