• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Phil P

    Kobelco hydraulic excavators

    Hello Jouster Here is what I did with our machine. Disconnect the solenoid on the throttle side of the machine. I my case the engine is a Cummins. Then I installed a throttle cable from the cab to the engine governor control arm. This requires some fabrication but not anything that can’t be...
  2. Phil P

    Caterpillar D4H low power smoking black

    Hi Because of my lack of being able to communicate with them this unit hasn’t even been run the last time the owner was there he was there for only 4 hours in the afternoon. He is going to be back next week and I am going to have to get it straight that he has to have some on the ranch that...
  3. Phil P

    Caterpillar D4H low power smoking black

    Hello every one. I have become discouraged with this customer. He is under the misconception that arriving her for a few days once a month is sufficient to manage this enterprise. I will keep you updated after his next visit. Phil
  4. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Here is the latest. Due to the lengthily delay based on the latest production times and shipping time we have purchased an engine from JD.
  5. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    I will check and see of that unit has arrived This repair is not in my shop it is in a dealers shop located 300 miles from me. One note the company that owns this machine is owned by a fellow that previously was in a management position with the company that owns the Cat IT28F I put a factory...
  6. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Hello all I haven’t forgotten you I just would like to get this new engine before making any recommendation. Phil
  7. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Cnote406 I have been ell with some kind of upper expiatory infection just now back to being able to accomplish much. I will get you phone numbers and address. Phil
  8. Phil P

    Caterpillar D4H low power smoking black

    No, it seems to start and run without any indication of a miss fire. Phil
  9. Phil P

    Caterpillar D4H low power smoking black

    Hello all It has been a while I have had a lot of equipment down for various reasons and this D4 is low priority. However here is a video of it working some. I am beginning to think I have an operator problem as much as a machine problem. According to the specs this machine only has a 45HP...
  10. Phil P

    4G4D Wisconsin Engine

    Thanks for the complement.
  11. Phil P

    John Deere 301SE Back Hoe / Loader

    Hello all To b ring you up to date. The cylinder could not be removed without removing the control stack. There was not enough room between the bottom of the control stack and the bar with the upper trunnion support in it. So, I remove the guts replaced the rod and seals and put it back...
  12. Phil P

    Caterpillar D4H low power smoking black

    Hi I now have the CD containing the manual for this unit. I will label the important items so I can try operating it. We are now putting the unit back together so I can operate it some and see just what is going on. Phil P
  13. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Thanks all of you. We are getting a short block from Japan. Phil P Sr
  14. Phil P

    4G4D Wisconsin Engine

    I get the idea that Dusty3388 is not paying any attention to this thread. Phil P Sr
  15. Phil P

    4G4D Wisconsin Engine

    We need more information from Dusty3388
  16. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Thanks to all of you I now have talked to the people doing the work. The engine did not pass a compression test before the removed the cylinder head, In the process of removing the cylinder head they discovered a hole in the induction system that allowed the engine to breath-unfiltered air...
  17. Phil P

    4G4D Wisconsin Engine

    Hello kshansen What you are describing is the difference between the Wisconsin VE, VF4 and the rest of the 4 cylinder engines. The VE and VF had a crankshaft in them that was made like an inline 4-cylinder crankshaft and that resulted in an uneven firing order. The rest of the V-engines had a...
  18. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Thanks ozarkaG What is your opinion about putting the smaller engine in this loader? Phil
  19. Phil P

    4G4D Wisconsin Engine

    Hi I grew up in a Wisconsin engine dealer ship back in the late 50’ and thru the 60’s. The model number should be VG4D V is the cylinder arrangement G is the series 4 is the number of cylinder and the D is the Stellite exhaust valves. These where a hardy engine and did not have any chronic...
  20. Phil P

    John Deere 331 G Yanmar engine sucked in a load of mud and water.

    Hello all I have very little information about this machine. I have been told the engine sucked in a load of mud and water so I assume it got submerged in an irrigation ditch and a hydraulic lock stooped the engine. All of the information I have is there are many codes and the head doesn’t...
Top