• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Cat 256C AC orfice tube

    Not quite 30$ at cat, but still cheaper on Ebay. The brown tube is the key, for orifice size .047" . Brown = ford, as an example as well. There is box kit of various tubes available as well "all colors / sizes" 26$ 4 seasons web site has a lot of information on various applications.
  2. P

    Cat 256C AC orfice tube

    AC Orifice Thanks Found it: http://www.ebay.com/itm/4-Seasons-38640-A-C-Orifice-Tube-Ford-BROWN-/360859404454
  3. P

    Cat 256C AC orfice tube

    Help, I can't seem to find the AC orifice tube in the online part catalog. Mine is plugged would to get a new before I pull it down. Is it a Red or Blue? or if you can fine a part number. Thanks Cat 256c DWS00524
  4. P

    Spicer/Dana Steer Axle Tie Rods

    A family member running logging trucks and gear swears by only pumping one shot of grease in a new one and never greasing it again extended the service lift on his gear. His thought process was to never lift the seal by over greasing.
  5. P

    Quick Attach Attachments?

    http://marketing.quickattach.com/acton/rif/10861/s-01ad-1609/-/e-0d9a-l-sf-contact-02bb:26044/e-0d9a-l-sf-contact-02bb/showPreparedMessage?sid=TV2:IdV6Bisis Recieved this today.
  6. P

    Sizing Pipe for Roof Drainage

    Always a good practice to plan for the rainfall amount of a 100 year storm, in your area, that way you're dead, or retired before a bigger storm comes to wreck your work... :drinkup:drinkup BaHaHA we had five 100 yr rains this year...
  7. P

    OT-Unexpected Death of a Parent-Tips for Working Alone?

    Thoughts and prayers to you and your family for your loss. I lived a similar loss and it was tough, but we worked through it. As Queenlander states, don't do anything in hast. Time heals all things and allows you to have a clearer view of what is ahead for you and your family. When we lost...
  8. P

    Using ATF in fuel filter

    Not in fuel filter, but have dosed the fuel with ATF to lube/clean the injectors. Quart to 30 gals.
  9. P

    Deere 333E with brush cutter terrible noise when stopping mower

    X2 mine does as well..
  10. P

    Bolt on Teeth for A Bucket

    Thanks. I purchased the machine used and the numbers were there from the contractors fleet management system.
  11. P

    Bolt on Teeth for A Bucket

    Well good news the welded teeth have with stood there first test, diggin and bumpin and stump up and out of the way..
  12. P

    Thinking about buying a skid steer mounted rotary mower

    X2 it's a beast on my 256C.
  13. P

    Bolt on Teeth for A Bucket

    You see the cutting edge and 10 shanks/teeth and 5 lbs 7018 1/8" where about 280$.
  14. P

    Bolt on Teeth for A Bucket

    Closing the loop, here is what I ended up with. Thanks Guys for the input
  15. P

    Auxiliary thumb rocker not working, Cat 287b

    Mark250 , Nige - Closing the loop here - Continuous and high flow are now operational thanks to this thread and conversation. I found a bad connection in the Aux. Elec connector, as it had been crushed and I replaced the same and installed the dummy cap, thinking all was well. I just did not...
  16. P

    Auxiliary thumb rocker not working, Cat 287b

    Understood Mark, Thanks. I may have an issue then as mine would not run in continuous mode until I installed the 107$ dummy cap on the new aux plug in, the old one was crushed when I bought the machine..?? And the high flow indication will not stay lit. I am headed to the farm for the next...
  17. P

    Auxiliary thumb rocker not working, Cat 287b

    Mark250, Thanks for the info. If all you mentioned is executed, should both the green indicators remain lit while operating? I had to install a dummy cap to get the Continuous Flow to lock in as you describe. Now, I understand the high flow jumper is required as well. I purchased a "high flow...
  18. P

    Brush cutter question???

    I have one of these and it has been amazing. https://www.youtube.com/watch?v=4a4YI8w1nXM
  19. P

    Auxiliary thumb rocker not working, Cat 287b

    Nige, Mark 250 - 256c XPS High Flow s/n DWS00524 First -Thanks guys for all you time and effort answer these questions. I am a fairly new Skid steer owner/operator, so the learning curve has been steep. My machine is new to me and has about 2000 or so hours, starts and runs fine and I have...
  20. P

    Fishmouth Fabworks shop thread

    Subscribed, great work. Looking forward to seeing more.
Top