• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    TAKEUCHI TL12V2 owners ?

    I will pass it along to technical next time I speak with them,
  2. M

    TAKEUCHI TL12V2 owners ?

    No worries man I'm just a tech I thought you had problems with both the 12 and the v2 my misunderstanding, does the V2 have active power control? That can cause the exact complaints you have, if it does try switching it off and see if you have any improvment
  3. M

    Building fire breaks with CTL

    Harley rake maybe? Otherwise they make a dozer blade attachment for large frame ctls
  4. M

    TAKEUCHI TL12V2 owners ?

    I mean there's only so much oil to go around so it has to be prioritized somehow
  5. M

    adding hydraulic quick attach

    They do, that's what we use to retrofit
  6. M

    adding hydraulic quick attach

    Well we are in WI so I don't know how reasonable shipping would be, but you reuse the manual q/a plate add a ram and valve and some hoses and bam done. Putting a coupler on a excavator takes a bit more work
  7. M

    adding hydraulic quick attach

    It shouldn't be near 15-20 hours we do them in 6-8 at our dealership
  8. M

    TAKEUCHI TL12V2 owners ?

    Not an owner but work for a dealer, what's up?
  9. M

    Tak TL140 can the engine be pulled without removing the hydraulic pump unit?

    Engine comes out the back, pumps can stay in
  10. M

    Takeuchi TL230 Pilot Line Filter Error

    Check the wiring to the restriction sensor? Is the sensor pluged
  11. M

    Running rpms

    lbx tech here, run the machine wide open unless you need to slow it down, i.e craning pipe etc, they are meant to run wide open during operation, better flow for the coolers etc
  12. M

    Gehl CTL-80 Won't move

    any luck?
  13. M

    Kobelco vs Link Belt

    FYI all new case excavators are made by sumitomo corp the same company that makes linkbelt and a few others
  14. M

    Any one want to help out a newbie with an old Link Belt excavator?

    Aw 46 is the correct oil for you're machine and climate, is the breather cap in good shape? LBX runs a pressurized hydraulic system relying on the tank cap to control system pressure
  15. M

    Gehl CTL-80 Won't move

    Get her figuered out?
  16. M

    Takeuchi TB016 swing play problem

    There should only be one with a sprocket that engages the slewing gear. The other one should be the swivel. I think it's the blue motor but it's hard to tell in the video
  17. M

    Gehl CTL-80 Won't move

    https://drive.google.com/file/d/0B3atP4ZPCabnLS1kYWhTQl9kaGs/view?usp=drivesdk This is the link to a Takeuchi Tl 150 and that's the same machine as a ctl80
  18. M

    Gehl CTL-80 Won't move

    Can you get me the SN and I'll see if I can get u a manual
  19. M

    Gehl CTL-80 Won't move

    You can simply test operation by removing the nut at the top of the coil then pull the coil it's self off and use a small screwdriver to check if it magnetised when the lap bar is down and not when it's up
  20. M

    Takeuchi TB016 swing play problem

    I would be willing to bet the swing motor bolts are backed out or missing compleatly I am a Takeuchi tech and see it all the time in the 016s
Top