• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. ITAMECH61

    CAT 428E trouble

    Hi Husika maiby a linkcage of a control remins actived and the engine rotates slowly due to a hidraulic charge and dosent start
  2. ITAMECH61

    Stop alarm signal in a 310j john deere

    Thanks lantraxco the parking brake is released and the transmision works well
  3. ITAMECH61

    Stop alarm signal in a 310j john deere

    HI i have a 310j backhoe loader when y tur the shift in forward or in reverse in the display panel apear the signol STOP flashing and the mensage is turn the shift to neutal position , ther are not codes actives and other flashing lights,the machine works all right and do the 4 shift fine anyone...
  4. ITAMECH61

    Jcb 3cx no drive

    Hi Ronthefordfan inspect the neutal solenoid take out and reviews that solenoid realy works.
  5. ITAMECH61

    JD 310SJ Tc L joystick has no power

    hi broke maybe the problem is in the base of the joystic inspec that if any was broken or wrong,check the security electromagnetic valves maybe ar stuked or don have electrical power
  6. ITAMECH61

    Oil for cat 955l

    hi Xaris you can use a multy grade oil sae 20w50 with trust the part of oil 20w the w means winter
  7. ITAMECH61

    Service Manual Trading Post

    hi i am lookin for a service manual to a JD 310j WHIT A POWER SHIFT TRANSMISSION
  8. ITAMECH61

    front bucket curls back slow ????

    hi novadigger if the calibration of the joystic dont result the problen is in the control valve to locate this and look two hoses one above and one down. this hoses enter in a caps in this caps a sccrew gauging the travel of the spolet maybe the problem is and incorrect adjust.
  9. ITAMECH61

    580ck 188d no rpm under load

    HI chevman723 and other test that you can do untyl you expect the compression gauge adapter is check the injectors one by one, withdrawn all the injectors and injectors line. take one injector line and put it in the injection pump take and injector and twist it turn the engine by starter and...
  10. ITAMECH61

    bobcat t180

    Hi galoot the switch have one lectric wire coming from the battery of course tru fuse panel maybe the wire is broken or a fuse,porta fuse is damage check whit a tester the continuity of the circuit.you are near to solution this problem go.
  11. ITAMECH61

    komatsu pc150-lc no start

    Hi sdd1369 may be the problem is compression when you have a used engine that no works for a few weeks in humid place. the pistons rings goes to glued by the humidity of the air caught in the cylinders. try to start the engine whit a spray lubricant put in the admision and start the engine at...
  12. ITAMECH61

    EX-100-5 leaking oil out from between car body and house(the main circle bearing)

    Hi bflobil the planetary gears have a final shaft whit a gear this shaft have and seal this seal maybe is damage amd the oil goes tru.
  13. ITAMECH61

    EX230LC-5 No fast travel speed

    Hi Justafarmer the presure sensor is in the pump and it works whit asignal to the ECM and this is the cause of the idle mode dont works wel. maybe the presure sensor is damage
  14. ITAMECH61

    cat 320d idle issue

    Hi srjd ithink that the problem is in the fuel line,my be a worm hose or a conection,if the throttle have a problem the problem persist in hot mode but if you have air in the fuel line when the engine is cool this air cause the problem, when te air come out the engine works good
  15. ITAMECH61

    Cat953b trasmission problem

    Ok Mr Nige i live in Venezuela we dont have de posibility to by this manual if someone have a web site to recomend for me to visit i will be grateful,anyway thanks for your response and evry thing i can help you tell to a friend. the serial number i will post to you.
  16. ITAMECH61

    Cat953b trasmission problem

    HI someone can help me i ned a trasmission manual repair for a cat953b,or a parts manual. thanks
  17. ITAMECH61

    bobcat t180

    Hi galoot the securyty sistem of the bobcat have a solenoids that restrict the movements of the machine if the computer dont send electric signal to this solenoids you can by pased this . Disconect the solenoids and put a wire whit batery current in a posite wiire osf the solenoid and other whit...
  18. ITAMECH61

    Bobcat s 70 overheats

    Hi cat digger the radiator is clean? Insaide and out side if the water dont interchange temperature the engine temperature increase gradualy with time of working. And other test you can do it is run the engine at low idle and check the temperature without working the machine if the temperature...
  19. ITAMECH61

    Need to buy used Cat 943,953 or 963

    HI GOBSAN check de oil leaks on the seals of the crank shaft, the oil pan, and other components, finaly check the clerance betwen the valves shafts on the bearing in the head of the enginne
  20. ITAMECH61

    Cat 257B bucket keeps falling off bc pins slid up

    Hi tony123 mybe the problem is in the internal o rings or a sprig damages
Top