• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    John Deere 850C dozer

    I can't find the ROPS tag on my 850c JD dozer. Anyone have a picture of the location or tell me where it is please. Thanks
  2. M

    Any Help with a Jaw Crusher and Screen Plant Preop Sheet?

    I am a retired MSHA inspector and I may have some forms that could help you.
  3. M

    crusher nuts and bolts

    Found it !!!! http://www.nord-lock.com/products/superbolt/nut-style-tensioners/introduction/
  4. M

    crusher nuts and bolts

    I wish I could draw what I am trying to explain. They were putting the cone back together and were tightening up the 2 inch ring bolts. they snugged them up and then took a 1/2 impact wrench and tighten the ring of bolts threaded into the nut it tightened it without using a 4 foot bar on a wrench.
  5. M

    crusher nuts and bolts

    Somewhere I found a web site showing large bolts with nuts that had smaller bolts all around the nut to tighten against the plate, I thought I saw them used on a cone crusher. Does anyone have the link to the web site? Thanks!
  6. M

    Komatsu Pc 210 lc

    I never thought of using round stock maybe re-bar? I wonder if that would be acceptable? Thanks!
  7. M

    Komatsu Pc 210 lc

    I just a got a fine for no steps on the tracks from MSHA. I said it never had them I am not sure of the year. Do all excavators have steps?
  8. M

    Cat 966C

    Thank you very much !
  9. M

    Cat 966C

    The numbers are 76J10005, will that tell what year it would have been built?
  10. M

    Cat 966C

    I am looking at a 966c Cat and have no idea what year it is, It does have a ROPS cab so I know it is later than '69 the serial number starts with 76J Thanks
  11. M

    A/C Problem VOLVO L90E

    I was having the same problem but at a cost of $1000.00 to come fill it. I went to wal-mart and bought a can of heavy duty 134A with a gauge and put it in myself. It has worked for over 8 months so far !
  12. M

    Case 450

    I found a Case 450 dozer and I am trying to figure out what year it is. The serial number is gone from the blade, and it has had a different diesel engine put in. The only number I found was 148 and underneath it was 2680507. There is no provision for a ROPS or seat belts which kind of makes me...
  13. M

    L90E Volvo A/C

    Hi We are in Maine and have 4 L70's, 1, L90E 1, L120C 1, L150D 1, L180C and also Excavators, a 160 2, 240's a 290 and 2, 360's
  14. M

    Trailer one, Mouse...

    Not sure how this happened.. but somedays it just doesn't pay to get out of bed..
  15. M

    L90E Volvo A/C

    trinary switch? It could be the trinary switch. It is between the rear firewall and the radiator. If you look in from the drivers side it is just before the dryer, it has 4 wires coming out of it. You can try re-seating the wires but if that doesn't work it will have to be replaced, and I have...
  16. M

    Anyone else have scales on their loader ?

    check here http://www.aadi.no/Loadtronic/Loadtronic3/default.aspx
  17. M

    Anyone else have scales on their loader ?

    The loadtronic series III we got went for $8500 but they installed it for free so I could demo it for them. The series three is certified for retail sales which is what we will be doing. I can also print a receipt. The series II was less but wasn't able to be state certified for trade. The way...
  18. M

    Anyone else have scales on their loader ?

    You are correct about operator skill. The scales I use has a beep when it has weighed the bucket. I have got to the point now where it doesn't even slow me down. I just back up and lift the bucket a little higher than I normally would and make sure it is rolled back and it beeps and I dump in...
  19. M

    It lives !!!!!!!!

    We put the pump back on after replacing the seals and o-rings and it pickup it's prime and moved under it's own power ! THANKS EVERYONE !!! Here is the original post: https://www.heavyequipmentforums.com/Forum/showthread.php?t=13099
  20. M

    Anyone else have scales on their loader ?

    We just had Loadtronics III installed on my Volvo L90E. They work great ! I have not had one complaint from any truck drivers about being too heavy and I am putting more on them now with the scales than I used too!
Top