• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    Wow good info., I need to keep digging
  2. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    I have the machine serial number and the hydraulic tank serial number is that enough? Because I don't have the blade serial number
  3. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    Great advise!..thank you
  4. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    Great info!.. I was wondering what would happen if one of the lines burst inside the beam! Haha.. unfortunately the serial tag is not on the blade anymore I see a lot of the Elite Series H's and K's had the same arrangement, someone already replace these lines and are way too long and...
  5. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    It looks like there are steel lines that run up through the blade arm , but I didn't get in there yet, but there are rubber lines that connect that you can see in the picture, that snake around under the machine and up towards the control valve
  6. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    I did give them both numbers.
  7. Liebherrman

    Cat D8H help with parts breakdown for blade hydraulics

    I don't know why my Caterpillar dealership sent me three different parts breakdown for the hydraulic tilt cylinder supply lines, and no other options for my 1969 D8H 46A dozer... my lines run up through the blade frame they could not find this parts breakdown Arrangement anywhere., does anybody...
  8. Liebherrman

    Adding a turbo to Cat D3 3204

    I'm just doing it for kicks I'm building a rat rod Dozer LOL, I have tons of other machines to do the real work., and yes it's getting sprockets and undercarriage work done also
  9. Liebherrman

    Adding a turbo to Cat D3 3204

    Anybody have any do's or don'ts about adding a turbo to an early D3 3204 engine?.. I can get an aftermarket turbo and manifold on the cheap side, I think I can set up an oil feed and drain, my only question is do I have to turn up fuel supply? And how could I do that?, Just a fun project
  10. Liebherrman

    Wanted vintage dozer

    Diesel, 4 or 6 way hydraulic, rippers, any condition, Case, Allis Chalmers, International, cat, jd., preferably East Coast USA, email Info@cannoncollector.com
  11. Liebherrman

    The Ultimate Small Dozer

    Another dirty picture of an ultimate small dozer.
  12. Liebherrman

    Looking for international td340, t340.

    Well I have a TD340 , 6way dozer with a 3 point hitch on the back located in Eastern Pa. Not cheap asking $9500 , also have a international 500C loader, 4in1, with a stuck gas engine available, 95% bottom Albrecht.rob68@gmail.com.
  13. Liebherrman

    The Ultimate Small Dozer

    Nice work. Does the Dozer have angle or tilt?
  14. Liebherrman

    The Ultimate Small Dozer

    Great collection!
  15. Liebherrman

    The Ultimate Small Dozer

    Here it is gentlemen! Built 1968 and 50 years running strong and probably will be running 50 years from now.. pedal steering if you want to lock up a track or powershift the steering levers and make a nice power turn
  16. Liebherrman

    Case 1150 Dozer tilt cylinder problems

    You know it's a bad design system when in the service book, they're telling you that many have been replaced and updated
  17. Liebherrman

    Case 1150 Dozer tilt cylinder problems

  18. Liebherrman

    Case 1150 Dozer tilt cylinder problems

  19. Liebherrman

    Case 1150 Dozer tilt cylinder problems

    I have a case 1150 A model 1968 with a 6-way blade it has to tilt cylinders that just were resealed and now they don't function hardly at all, not that I know they function very well before because I just bought this machine ,this machine used a very early retarded hydraulic plumbing on this...
  20. Liebherrman

    1965 Case 310G project

    I would love to have that little case Dozer I have 2 310 loaders would like to have a blade albrecht.rob68@gmail.com
Top