• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. T

    Samsung SE130LC-2

    It is between the engine and the fuel injection pump. I put in a manual pull wire that you see in the picture so that I could operate the machine. You pull it to run and push to shutoff.
  2. T

    Samsung SE130LC-2

    Here is the best picture I can get.
  3. T

    Samsung SE130LC-2

    I’ll post a picture when I get back to the machine.
  4. T

    Samsung SE130 LC-2 Excavator

    Thanks
  5. T

    Samsung SE130 LC-2 Excavator

    Do you have a wiring diagram for the Samsung SE130LC-2 excavator? I am trying to replace some wires to the Fuel Shutoff that melted. The diagram I have shows a ground wire and wire 4R that goes to the accessory switch. The problem I have is that the Fuel Shutoff Solenoid has 3 wires, a...
  6. T

    Samsung SE130LC-2

    Mine does not look like that.
  7. T

    Samsung SE130LC-2 Excavator

    Does anyone have another schematic for a Samsung SE130LC-2 Excavator. The one I have says it is for Series 130 Excavators.
  8. T

    Samsung SE130LC-2 Excavator

    Its a 1998-99 machine. Serial No. DBY1373.
  9. T

    Samsung SE130LC-2

    It’s the Fuel shutoff solenoid. How do you get to it to replace.
  10. T

    Samsung SE130LC-2

    It’s the fuel Shutoff; it cuts the fuel off.
  11. T

    Samsung SE130LC-2

    I have yet another question. How do you remove the fuel shutoff valve on a Cummins Cummins 4BTA3.9-C engine. It looks like it is hard to get to.
  12. T

    John Deere 580G hydraulic Cylinder

    I finally got it. I used a winch to pull the gland taught so it would not spin and then was able to unscrew the nut.
  13. T

    John Deere 580G hydraulic Cylinder

    Sorry, I had a brain fart. I was thinking you were referring to the rod nut. I think I may just have to put some pressure on it with a winch. What do y’all think?
  14. T

    John Deere 580G hydraulic Cylinder

    I was able to rebuild one of the lift cylinders with no problem.
  15. T

    John Deere 580G hydraulic Cylinder

    I can’t get to the gland because the end cap will not come off; it just spins.
  16. T

    John Deere 580G hydraulic Cylinder

    I am having trouble removing the end cap from my angle hydraulic cylinder. I was able to loosen the end cap with a pipe wrench and 6 foot cheater pipe but now the end cap just spins and will not come off. Can someone help me here.
  17. T

    Samsung SE130 LC-2 Excavator

    Is it SAE, British, other?
  18. T

    Samsung SE130 LC-2 Excavator

    What type of hydraulic fittings are used on a Samsung SE130 LC-2 excavator that attaches to the connectors on the main control valve. My connections from the tube pipe are leaking and will probably have to replace. Also, does anyone know size flange connectors are used. Thanks
  19. T

    Sealant on main control valve

    Thanks everyone for you replies. It is a connector going into the main control valve and then the pipe connector connects to it. The connector has a flat face behind the threads where the O-ring goes. See pictures. The first picture shows the connection to the main control block. The second...
  20. T

    Sealant on main control valve

    Should any type of sealant (Loctite) be used when reinstalling pipe connectors with o rings to main control valve on excavator?
Top