• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    Genie Lift TZ50 Battery Charging Issues...

    Last year I replaced the 4 6v Deep Cycle batteries on my TZ50. This year I seem to have a problem with either the batteries or the charging system. I plug in the charger it goes through the charging cycle and usually ends with a flashing light and beeping (some time the next day). Looking up...
  2. R

    Genie Lift TZ50 extending basket does not level basket when it extends

    Found the problem. 2 Bad 24v relay's inside the control box. Waiting on parts and I'll be back in business. About an hour's worth of my time and avoided a costly repair plus having to take the lift in.
  3. R

    Genie TZ50 2 functions only go in one direction

    Found the problem. 2 Bad 24v relay's inside the control box. Waiting on parts and I'll be back in business. About an hour's worth of my time and avoided a costly repair plus having to take the lift in.
  4. R

    Genie TZ50 2 functions only go in one direction

    I swapped the connectors. The solenoids and hydraulics appear to work just fine on all of these functions. This appears to be a wiring problem. So the lower control box is clean dry and does not appear to have any bad connections. The upper control box has rust evidence of moisture (dry now)...
  5. R

    Genie TZ50 2 functions only go in one direction

    I've got a TZ50 that has 2 functions that will only go in one direct. These are: Basket left/right (not boom, but basket). If I swap the solenoid connectors it will go in the opposite direction Basket Tilt (Again, only one direction no matter yellow or blue) Any sense as to what is...
  6. R

    Genie Lift TZ50 extending basket does not level basket when it extends

    I played with the lift again tonight and I've found another problem. It seems there are 2 functions that will only move in one direction no matter whether I'm pressing the blue button or yellow button (up/down). These function are basket left/right - not boom, but basket) (both buttons move...
  7. R

    Genie Lift TZ50 extending basket does not level basket when it extends

    We've got a Genie TZ50. at the end of the boom we have a extension which allows you to extend the basket a few more feet. When we raise this element the basket should move outward to maintain it's level position. This is not happening. The basket just follows the extension and does not move...
  8. R

    Lull 944E42 that won't run after bad fuel

    Mechanic came back today and swapped the pump and the machine is once again running. Was an expensive fix but we have to work... Thanks everyone for your help and tips. Roveer
  9. R

    Lull 944E42 that won't run after bad fuel

    As best as I can tell the Cummins engine is a QSB4.5 and the pump part number is: 4988593. Any help on how to purge/prime would be helpful. Roveer
  10. R

    Lull 944E42 that won't run after bad fuel

    Ok, mechanic came back to our jobsite on Thursday. Before putting in the injectors he pulled one, connected a new injector to the fuel line and before installing it cranked the machine to see if the lift pump would cause it to pop with a spray of fuel. It did not. Now the culprit seems to be...
  11. R

    Lull 944E42 that won't run after bad fuel

    All makes sense. We weren't getting any smoke and would run on ether until depleted then engine would wind down. Was getting fuel at the line to the injector but I don't know if he was checking for bubbles or pressure. Tomorrow we will be pulling injector to see if we get mist. I believe...
  12. R

    Lull 944E42 that won't run after bad fuel

    I do know that when the mechanic opened several of the fuel lines they were all squirting fuel including in and around the lift pump (I'm now learning some of the terminology through my research.) He even opened the line up by the injector and there was fuel there. His problem was that he said...
  13. R

    Lull 944E42 that won't run after bad fuel

    We've got a Lull 944E42 with a Cummins diesel engine that was running rough last week (sputtering and stalling) then wouldn't start. After looking at the fuel it was pretty dirty and so was the fuel filter. All changed, tank drained lines blown out. New fuel and filter and now it won't start...
  14. R

    Case 40xt was blowing fuse and shutting down, now, blows fuse, won't run

    So we picked up our part today from our service company. Since I was able to get the bucket in the air and cab forward I finally could see the parts. I decided to pull both connectors and lower the bar and the machine continued to run. I then plugged in the solenoid that I did NOT have the...
  15. R

    Case 40xt was blowing fuse and shutting down, now, blows fuse, won't run

    We noticed that if we keep the bar up the motor runs, once we lower it the fuse blows and the motor quits. My service company is recommending one of the solenoids #15 on my parts diagram. I've ordered it and it should be in soon. Hopefully that gets us running again. The wiring didn't seem...
  16. R

    Case 40xt how do I raise bucket with no power?

    We suceeded in getting the bucket up today. I brought to buckets to the jobsite and unhooked both hoses going to the cylinders. We blocked the back of the tires and using a mini excavator lifted the bucket until we could get the safety engaged. Didn't spill any oil. Now to get on with our...
  17. R

    Case 40xt was blowing fuse and shutting down, now, blows fuse, won't run

    Luckily I've got the parts manual for this machine so I've looked at the drawing for where the solenoids are. We are in the process of getting the bucket into the air so we can bring the cab forward and get to these areas. Hopefully that will be my problem and I'll back back in business soon...
  18. R

    Case 40xt how do I raise bucket with no power?

    I need to raise the bucket so we can pull the cab forward to get to some solenoids. I've been told two things 1. Release level by right foot - not sure if that will allow bucket to be raised possibly only lowered 2. Disconnect hydronic lines and allow fluid to be released to raise bucket...
  19. R

    Case 40xt was blowing fuse and shutting down, now, blows fuse, won't run

    My local dealer is telling me that one of the solenoids is probably the culprit. Unfortunately in order to get the cab open I have to raise the bucket fully and with no power I can't do that. He think's if I use the release level (by right foot) that will allow me to travel the bucket...
  20. R

    Case 40xt was blowing fuse and shutting down, now, blows fuse, won't run

    We just moved one of our 40xt's to a jobsite and it was running just fine on Monday. Tuesday it started blowing a fuse (the one that has a picture of a "lock" now it blows the fuse immediately and will not start. We are searching for our manuals and figured I'd ask here since you guys know...
Top