• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Genie TMZ 34/19 Error Code 0011

    Are the cables you are unplugging made up of a bunch of individual white wires with an orange end? There are two that look like that in the box and they are not the ones you'd want to unplug. The one you'd want is a super thin ribbon cable which will actually come out of the back of the metal...
  2. B

    Genie TMZ 34/19 Error Code 0011

    0015 is a code for the ground keypad fault. Easy way to check is to open up the box it is mounted to and pull the ribbon cable which comes from the keypad out of the board it plugs in to. If the error clears then replace the pad. If it doesn't clear then the manual says your circuit boards have...
  3. B

    Genie TMZ 34/19 Error Code 0011

    No sir, it has performed flawlessly since then. I've been told by electrician friends of mine that these foil touch pads are notorious for having issues. If you look at the next generation of Genie towable lifts they switched to toggle switch controls like JLG uses. More robust IMO.
  4. B

    Genie TMZ 34/19 Error Code 0011

    I got the same error on mine at one point, too. Unplugged the lower pad and it worked just like you have done. I replaced the pad and it was repaired. So yes, I would say you are correct. I didn't bleed the hydraulics to get the legs up, though. Just remove the bolt, keepers, and pins that...
  5. B

    Genie TMZ 34/19 Error Code 0011

    My unit is long fixed - not sure about andycarey's lift. The box with the swing top is a Telemechanique limit switch, at least on my 34/19. Worst case if it is within reach you can always actuate the switch by hand to make the machine think it is landed. Or jump it out and bypass the limit all...
  6. B

    Genie TMZ 34/19 Error Code 0011

    Automatic outriggers. The touchpad which I got for $149 (the one at the link I've shown you) is for the platform control panel in the basket. It will never have outrigger controls as they are always raised and lowers from the ground station. The touchpad which goes in the base of the...
  7. B

    Genie TMZ 34/19 Error Code 0011

    http://www.gciron.com/Genie_Parts_GN_76097_DECAL_PLAT_TOUCH_PAD_TMZ34_p/gn-76097.htm Somehow the price jumped from $149 in October 2015 to $380 now. Still less than $550.
  8. B

    Genie TMZ 34/19 Error Code 0011

    I saved them, yes. I believe they are still good (since it ended up being a bad touchpad) but I have no way to guarantee that. I will PM you
  9. B

    Genie TMZ 34/19 Error Code 0011

    Alright, the lift works again. The testing procedure for the platform control pad worked. If you get a code 0011 I suggest you start with that test before spending $1700 unnecessarily on boards. See the post above this one for the procedure. I was successful in rebuilding the box by myself...
  10. B

    Genie TMZ 34/19 Error Code "0000"

    If your unit has a serial port for diagnostics this should apply to you. Genie tech that I talked to pointed me to this link (ftp://ftp.genieindustries.com/Chris%20H/) and said to download TMZ Monitor.exe. He also said that you must connect to the unit serial-to-serial from a computer; it will...
  11. B

    Genie TMZ 34/19 Error Code 0011

    Ok, we have made progress. Had a ribbon cable plugged in backwards which made the board freak out and display error codes which should not have existed. Watch carefully when you install those as there is a very small indexing extrusion on the cable end and a matching slot on the board. Fixed...
  12. B

    Genie TMZ 34/19 Error Code 0011

    Genie says 0100 doesn't exist; wondering if I somehow put the fault code display in upside down and it is actually code 0010. Consulted with a local guy who indicated that the higher fault codes usually have something to do with a coil not working when the lift does a system check during...
  13. B

    Genie TMZ 34/19 Error Code "0000"

    I need that software too if its available. Just put new circuit boards in mine and I now have error code 0100. Guess what, that doesn't appear in any of the manuals!
  14. B

    Genie TMZ 34/19 Error Code 0011

    Put the new boards in today, now have error code 0100. Doesn't even appear in the manual for any of the lift models or years. Fantastic!
  15. B

    Genie TMZ 34/19 Error Code 0011

    Yep, sometimes it does seem like they are just guessing. I guess I should bring this thread up to speed. In an attempt to save some money instead of purchasing the $1700 blue board upgrade kit from Genie I sent the platform control circuit board to PLC Center/Radwell International in New...
  16. B

    Genie TMZ 34/19 Error Code 0011

    *Bump*
  17. B

    Genie TMZ 34/19 Error Code 0011

    Tried contacting Genie, they wouldn't give me the time of day since I was not an authorized service center. Or something like that.
  18. B

    Genie TMZ 34/19 Error Code 0011

    Yes. I see information and schematics for models before T3400-001 and after T3499-769; unless I'm misreading my unit does not fall in to either of those ranges. Additionally the platform controls shown on those schematics look nothing like the one on my unit. Is there something in the...
  19. B

    Genie TMZ 34/19 Error Code 0011

    Thank you BillG. I did download that manual. What is really throwing me for a loop is that, per the manual, the LED error code display was added after S/N T3402-115 and the error codes are only good after that S/N. My unit has the LED display but the S/N is before the S/N when they added that...
  20. B

    Genie TMZ 34/19 Error Code 0011

    I should add that it appears as though all upward boom functions have been disabled. Outriggers work, the boom will rotate (as far as it can inside of the cradle), and if you try to make the boom lower you can hear the valving open (although the boom obviously has nowhere to go since it is all...
Top