• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    943 Cat track loader

    943 track loader 19ZO1128 50% Cat bottom gp bucket ropes canopy bad news it got water in block from bad flex pipe 11000 hours good straight machine will need overhauled. Ive not pulled pan just drained engine. Engine is stuck. Everything was good till this happened . $12,500 423-773-8772 East...
  2. D

    Transmission light and buzzer

    Thanks for the info
  3. D

    Transmission light and buzzer

    I doubled checked and when i turn master key on the light flashes only but when it starts both the light and buzzer comes on. Thanks
  4. D

    Transmission light and buzzer

    19zo1902 no the light and buzzer dont come on till you start it. Thanks
  5. D

    Transmission light and buzzer

    I have a 1992 943 with 7700 hrs on and it has set for about 3 years and everything works but the transmission and horn buzzer continiue to go off while running. Is there a switch on transmission that is stuck since the oil is cold and the machine operates fine? Thanks
  6. D

    Engine stuck

    Just put a new starter on but will pull off to turn ring gear with pry bar, Thanks
  7. D

    Engine stuck

    Hadnt thought of it that way but it makes sense to pull head then put in whatever and let it work.
  8. D

    Engine stuck

    Ive got a cat 943 with the 3204 engine that has sat for 5 yrs and now its stuck. Im planning on pulling injectors and putting somthing in there to break it loose . Its not from anything going down the exhaust as that was covered good. What are some good solvents you have used that will break it...
  9. D

    Tilting cab on 943 19zo

    Ok thanks for the information , Ill jack the cab all the way up and see if i can get it in there.
  10. D

    Tilting cab on 943 19zo

    Ive got to raise the cab so i can pull injectors so i want that safety bolted in there to make sure it cant fall
  11. D

    Tilting cab on 943 19zo

    Ok i see where those two go but what about the long one that has threads in one end that uses the bolt that held the cab down. It had 2 3/8 bolts that secured it down on the flat place above the starter. My book shows a pic of it with the threaded end being held with 1 of the cab bolts thru the...
  12. D

    Tilting cab on 943 19zo

    Where do the red safty pieces go when you have the cab jacked up? I cant find anything in the book that shows pics of them in place. Thanks
  13. D

    Moving a non running 943

    Thanks for everybodys help on removing the axles on the 943.
  14. D

    Moving a non running 943

    Im not seeing any release systems on the 2 i have so how do you pull the axle. Nige sent some paperwork but i dont know how to download it. So how do you pull the axles, just take cover off of final drive and remove bolts ?
  15. D

    Moving a non running 943

    Thanks for the quick response Nige but ive got to get someone to show me how to download on a ipad. Ive looked in the book but it just shows pumping up the brakes on the older models. I was told on this later model it was best to pull the center out of final drive housing and it would freewheel.
  16. D

    Moving a non running 943

    I have a 943 (19ZO1128) that i need to put in the shop that is non running.It is a 1989 yr model. How do you go about pulling the axle or gears in the final drive so it can pull with another machine. Thanks divedigger
  17. D

    Postives and negitives

    Thanks i was not thinking about it ending the neg on the starter ground. Ive got to redo some ends on cables
  18. D

    Postives and negitives

    Working on putting batteries in a 943 and was wondering about which polarity does the first cable leaving the starter go to positive or negitive? Its had new ends put on cables so they may have put on the wrong way starting from the battery. I think it leaves the starter as postive then swithes...
  19. D

    Glider kits

    Randy pm me about 359 Thanks divedigger
  20. D

    cat hydra stat transmission mechanic needed

    Hey Georgia Iron, PM me a # to call and I will talk about the 943 Thanks Divedigger
Top