• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. L

    873 Bobcat Muffler

    I was in tractor supply the other day and they had a muffler there that could be used. With some modification of course
  2. L

    873 Bobcat Muffler

    Is it needed?
  3. L

    873 Bobcat Muffler

    I just ran my 753 straight piped. :usa Its really not too bad, the fan almost makes more noise then the exhaust. And it cost me 15 bucks!!
  4. L

    753 G Series 26-3 27-3 Codes

    I tested the with a meter and they both read out 3.3 OHMS. I'm not sure on how to test them with 10v now.
  5. L

    753 G Series 26-3 27-3 Codes

    I had a 12-23 code before, and when I took the old handle of the wires were all fraid and nasty looking. (the end of my handles are extremely rusted and need replaced for sure). I am going to diagnose more today. Not having my aux is being a burden now. But maybe a new T650 can fix that!!!
  6. L

    753 G Series 26-3 27-3 Codes

    Ok I just went out and checked and everything is good. Now could it be a problem with the 2 10v coils on top of the hydraulic valve body. From what I read the coils are magnetic, so I loosened the nut on top and tried to move the coil while trigging the switch on the handle. And I got...
  7. L

    753 G Series 26-3 27-3 Codes

    Thanks for the response. I am pretty certain that I got it right. I am going to look at it again, but since I already put the plug back on how do I check and see if its right?
  8. L

    753 G Series 26-3 27-3 Codes

    Sorry for all the miss spelling some how I posted before I was finished, and the serial number for my machine is 515 832 169 Thanks
  9. L

    753 G Series 26-3 27-3 Codes

    Hello everyone, I have a 2000 753 "g" series bobcat. I recently installed a new right hand 4 switch handle assembly . (part#6680418). I had a 12-23 error code, so I did some research and i narrowed it down this. Being $270 bucks its was not cheap, but...
Top