• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    763 Bucket controls wont engage Traction lock

    Concretepumper,most likely connection problem is right at the box in the cage on your right as your sitting in the seat. You'll need to lift the cage and remove the box to access the connector retainer.Then clean connector pins with WD40 or similar product,and apply dielectric grease(AUTO PARTS...
  2. B

    763 Bucket controls wont engage Traction lock

    Andy, Good place to start would be the connector to the BICS (Corrosion)clean and apply dielectric grease.
  3. B

    Attachment Wiring Harness Older 763 F

    Any options to use newer attachments on older F series with-out connector.I have aux. hyd. but no elec. conn. .I understand from BC that this mach. used 14 pin and newer are 7 pin .They have an adapter but I would have to buy older harness and the adapter.Would like to add Harley Rake to...
  4. B

    My Mini and Parts

    Big daddy: I have that same trailer myself .A word of caution , DO NOT Operate with a low pump battery , it will dump Hyd. fluid out all over the box.Other than that great trailer very strong .I see yours has rear stabilizers , any chance of getting another pic closer up to them?? .
  5. B

    Bought used bobcat - need advice!

    As NOBULL1 says 0.008 (0,20 mm ) COLD .There is a sequence to do it with only one revolution . a. With the rocker arm rocking (valves 7 & 8 )on No. 4 cylinder set clearance at No. 1 cylinder (valves 1 & 2 intake exhaust ) b. With the rocker arm rocking (valves 3 & 4 )on No.2 cylinder...
  6. B

    Zerk fitting removal

    If you have enough room for a socket,maybe the Bolt Out Tool from Sears will get a hold of it.Works like a female easy-out and doesn't require drilling or the always fatal broken easy-out .I've used them for years and have yet to break even the smallest one.
  7. B

    3 Point Box Blade On Skid

    Taylortractornu, No problem with welder/fabricator,spent 35+yrs. in collision repair and still have a real nice MIG/TIG out in the Barn.It was my plan to use the Box Blade as a base to the project.No hills to roll down in my neighborhood but I get your point. I was referred to the John Deere...
  8. B

    Need help 763 wil not start

    yamahauler , THANKS Very glad to have helped, great to be on the other side after all the help I've gotten here. AtlasRob,many thanks to you as well . Jerry L.
  9. B

    3 Point Box Blade On Skid

    JDOFMEMI and everyone else , Thanks again for the help. Really like the JD unit Jerry.Looks exactly like what I'm looking for,simple and durable.Checked the JD site and they have a very impressive video of the unit in use.I happen to live in AC country but will check with dealer on pricing.If...
  10. B

    Need help 763 wil not start

    Bible says, Power Indicator light does not come on ; Solution 1,2,3,6 1. check that ignition switch ON 2.Check BICS 10 amp. fuse 3. Check wiring and connections.Make sure the connector is securely connected to the controller.Remove controller and pull on connector to check. 6.Check wire...
  11. B

    Need help 763 wil not start

    When your sitting in machine,look behind your right shoulder at BICS panel.Do you have green lights ?? .There may be a blown fuse for the interlock solenoid.The solenoid is located under the ROPS (Roll Cage ).Mounted to the chain case .
  12. B

    Cat 277 - Fuel Issues, not starting - Pic attached - Please help :)

    Lobell , May be a good idea to drain and flush the tank as well.Sounds like you have a collection of crap in there .
  13. B

    3 Point Box Blade On Skid

    25c , No hills here , old lake bottom clay .which causes pot holes every spring after the ground thaws .Gave some thought to attaching a quicktach plate to the opposite end of a three point box blade so I could push with scariffers and back drag with (rear blade ).Would like to have the...
  14. B

    3 Point Box Blade On Skid

    salopez , no, not just for mine.Was looking at possible additional work for the little machine. 25c ,I have done several drives with the GP Bucket but thought the Box Blade would be faster at re-positioning existing stone.I live in a semi-rural area near Lake Erie with alot of reasonably long...
  15. B

    3 Point Box Blade On Skid

    Thanks Bob , Gives me alot of food for thought.Really liked the optional roller attachment.Once again I can't say how much HELP this site has been.The advise and direction here is priceless ,thanks to everyone that make it possible !!!!!!!!!! . Jerry L.
  16. B

    3 Point Box Blade On Skid

    salopez, Thanks for the reply,looking at the adapter on ebay from steel-tec.Looks well made,was just wondering how well it woulb hold up with reasonable care(not over working it).Tractor Supply in town has a 6' King Kutter Box they would let go cheap.I've been watching for SS boxes for some...
  17. B

    3 Point Box Blade On Skid

    Has anyone tried this,for light dirt and gravel driveway work.Money is tight and need something inexpensive.Thanks in advance !!
  18. B

    Need help 763 wil not start

    Have you looked at the connectors under the ROPS ???Do you have power to that point.
  19. B

    need wiring diagram

    yamahauler, Have you found the diagram you needed yet.
  20. B

    Bobcat needs engine...

    Can anyone tell me if the Peugeot can be switched to a Kubota with-out opening a big can of worm's.Looking at a blown 751 fixer also.
Top