• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. KyDirt

    763 Bobtach Wear

    Sounds like the simple cost effective solution.
  2. KyDirt

    763 Bobtach Wear

    The bobtach on my bobcat has excessive play from right to left between the loader arms at the pivot pins. I have replaced a set of pins and bushings before (not this machine) and though these probably need replaced , that won't help my side to side movement issue from what I can remember about...
  3. KyDirt

    763 valve block leaking

    Installed the seals and fixed the issue today. I have a 97 763c. No removable spool lock block like the one in Willies thread. Not having to remove spool lock or replace spool lock seals made my rebuild considerably easier i would assume. Did it all from the top side. Appreciate all the input...
  4. KyDirt

    Bobcat 763c Eratic fuel guage

    Had a poor connection at the sending unit connector. Shifted the harness when I was removing hydraulic reservoir today and it momentarily quite bouncing. Cleaned connector and relieved the strain on harness. Thanks for the advise.
  5. KyDirt

    Bobcat 763c Eratic fuel guage

    Fuel guage 1997 bobcat 763c. The fuel gauge does operate (not properly) but the needle seems to bounce/vibrate when operating. It's not reading accurately. Likely the sending unit? If so, couldn't find a thread with issue but I know it has to be common.
  6. KyDirt

    763C Keyless Start

    Part # 6724586 for the instructions Part # 6712972 for the keyless kit Bobcat OPC says contact dealer for instructions when you click the part instruction part number. Can't find any info online when I search either number. At least I know what part # I'm dealing with now, that's half the battle.
  7. KyDirt

    763C Keyless Start

    Will try. Thanks
  8. KyDirt

    763 valve block leaking

    Watched it already. Excellent instructional. Thanks for the heads up.
  9. KyDirt

    763C Keyless Start

    I have an old style keyless start pad in my 1997 763. It has square raised numbers with 2 numerals per button. Downloaded a repair manual and user manual. Oddly I cant find any info on this keyless start control. No issues, would just like to know how to change code and general operation for...
  10. KyDirt

    763 valve block leaking

    Got the parts ordered. Appreciate all the input.
  11. KyDirt

    763 valve block leaking

    Remove the spring and try to remove the spool as well or leave the spool in and try to work the seal out from around it?
  12. KyDirt

    763 valve block leaking

    1996 bobcat 763. Lost all my hydraulic oil through this valve block today. https://photos.app.goo.gl/609SXo3vO5FJoiwE2 The cap on the end of the lower "spool valve" (excuse my ignorance if that's not what these spring operate) began hemoraging oil today. When i removed the cap there was no...
  13. KyDirt

    753 Rear Door Compartment

    :)I can't remember the purpose for the black compartment attached to the rear door. I'm beginning to wonder if I ever really knew. Anybody know the manufacturers intended purpose for the black metal box integrated into the rear door with the spring across the top?
  14. KyDirt

    Grouser Cross Bar Track Rebuild Kits.

    Anybody have a source for rebuild kits (bolt & bushing) from somewhere other than Grouser. Seems like Grouser wants you to call for pricing. Wondering if anyone found it cost effective to get bushings made at machine shop and purchase bolts separately.
  15. KyDirt

    753 Chain Case Overfull

    The plan all along has been to pull the motors, install seal kit, and get back to work. The following statement from Loader Parts Source page is what has me suddenly asking "are my motors junk". If your geroler is worn we will be unable to rebuild your motor. The geroler is the center drive...
  16. KyDirt

    753 Chain Case Overfull

  17. KyDirt

    753 Chain Case Overfull

    Got one motor out of the machine and onto the bench tonight. Shaft flops around in the housing. I can easily spin it by hand and it has almost an inch of free travel when pulled in and out of the housing. Is this a hopeless chunk of scrap metal?
  18. KyDirt

    753 Chain Case Overfull

    Checked case drain filter and found no metal or unusual contamination. Filter was in severe need of replacement. After running the machine now for about 16 hrs the fluid doesn't seem to be hemorrhaging into the chain case unusually quick. (thanks crewchief888) it must have been long term...
  19. KyDirt

    753 Chain Case Overfull

    That sounds like a solid plan. I think I'll take that advise and run with it. Thanks for the input and direction.
  20. KyDirt

    753 Chain Case Overfull

    Dealer says motor is NLA. They may be able to get a used one. I think I can work my way through putting a seal kit in on my own if that's the only problem. If the damage is more extensive, can it be sent off and remanufactured cost effectively? I understand this is a lot of hypotheticals...
Top