• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    97 genie z45 platform level not working

    The platform level/tilt on my z45 was working and at end of the day stopped. When you try the controls from platform or base running or auxiliary it builds pressure in line ( you can see line flex and hear machine hydro work) But nothing moves.
  2. A

    1997 genie z45 basket won’t tilt

    Basket just stopped tilting was working just randomly stopped. You can hear hydraulics strain and line flex from pressure when you hit tilt switch.
  3. A

    Anyone familiar with the genie Z45/25 4wd doesnt seem to work?

    Old thread but did you ever fix problem?
  4. A

    Ford LRG423 Choke

    Check power at choke wire when I hit the start switch the choke power goes on, let off on start switch and choke power stay on for 2-3 seconds. The choke does not move at all unless by hand. I tried adjusting choke coil all the way rich. The carburetor and choke coil are brand new
  5. A

    1997 genie z45 slow moving

    Any chance you have photo of that page?
  6. A

    Ford LRG423 Choke

    I just installed new carburetor on a 97 genie z45 with ford lrg423. The choke does not seem to be working. I can turn it by my hand from the stub shaft on carburetor. How do I test electric choke? My machine shows a spot for choke/glow plug but looks blocked off from factory.
  7. A

    1997 genie z45 slow moving

    Serial z45-00-6307 All boom and swing movements are slow when powered by machine. But when I use the back up auxiliary everything is way faster. Any clue why this like that? My level sensor seems to be broken is the a way to bypass to test? My travel speeds work from slow to fast but fast...
  8. A

    IT 18 F wheel seal

    Ok cat told me brakes wore out and now hydro fluid is getting pushed into axle. Does this sound right?
  9. A

    IT 18 F wheel seal

    It’s coming from area E where the #5 is on photo heymccall posted
  10. A

    IT 18 F wheel seal

    6zf00156
  11. A

    IT 18 F wheel seal

    I have a 1996? Cat IT 18 F wheel loader and gear oil just started pouring out right behind front wheel. Can anyone point me in the direction to replace this. Thanks
  12. A

    1994 cat IT28F

    Just bought a 94 IT18F loader. Can anyone break down this model for me ? Anything about the model would be great? What's the F stand for?
  13. A

    416b warning light / gauges

    Battery grounds are good and dash ground is good
  14. A

    416b warning light / gauges

    Cleaned the terminals. Got new batts in it. Any other thoughts or ideas
  15. A

    416b warning light / gauges

    I have a 93 416b the warning light is on steady and the temp, oil, fuel and trans gauges read nothing. I have gone through the whole machine with filters and fluids. I have tested the gauges and I can get them to read by grounding. Does this mean all my sending units at bad? Thank you
  16. A

    Cat 416b rear end fluid

    Does anyone know the amount of rear end fluid for a 93 cat 416b
Top