• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Case 480F lost first gear

    I did check the oil when it was idling. It has the transmission dipstick tube over the starter on the right side of the engine. The oil looks relatively clean and doesn’t smell burnt. The gear selector shifts into all four gears with no problems or grinding. It move forward slowly but with...
  2. P

    Case 480F lost first gear

    I just got clarification. The fluid level is good, the machine shifts in all gears but only creeps when in forward or reverse, regardless of what gear you are in.
  3. P

    Case 480F lost first gear

    I have a case 480f that has no power in first gear. The gears seem to be working as they should. I’m thinking it has a bad clutch pack in the shuttle shift for first gear but I’m not sure. Any input would be great.
  4. P

    T250 drive issue

    We have a t870 that had the same problem, lost right drive and sent a charge pressure code. It ended up being the hydrostatic pump that was failing on the right section. After replacing the pump I was still having a problem with the right track. I pulled the brake block out and totally...
  5. P

    Bobcat 843

    If the right lever doesn't move flip the cab up and sometimes there is a bolt that locks out the auxiliary function
  6. P

    cutting torch acetylene regulator to propane tank question

    I have a propane torch setup at the house that runs off a 20 pound tank with no problems. Internal threads are on new tanks as well. my oxygen consumption is not crazy by any means. I do like the convenience of propane for after hours use because I always have multiple tanks around. My gas...
  7. P

    Cat 268B drive/steer problem

    after some delay i was able to get back this project and a found a few things. First, as soon as a start the machine the tires are trying to roll forward against/through the park brake. The park brake holds the machine in place. Once I release the brake both left and right side drive tires...
  8. P

    Cat 268B drive/steer problem

    thanks so much for the info that is very helpful
  9. P

    Cat 268B drive/steer problem

    As soon as the engine starts you can feel the machine pulling in reverse against the park brake. when the brake is released it wants to roll backward like the joystick is not finding neutral. had the problem before the joystick was replaced. the complete lower joystick control valve was...
  10. P

    Cat 268B drive/steer problem

    I'm working on a 2009 cat 268b with poor drive and steer function. When the machine is started it pulls in reverse against the parking brake. When the brake is released it want to roll all over the place like the joystick is not in neutral. The machine rolls and steers but has a huge delay...
    • pat86
    • Thread
    • 268b cat drive hydraulic skid steer sterr
    • Replies: 7
    • Forum: Skid Steers
Top