• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    Caterpillar 320 excavator boom cylinders

    I have caterpillar 320 excavator that I have the boom hydraulic cylinders leaking and need to install a new seal kit. My question is are these the cylinders that have to be pressed in or is it an easy slide out and slide in. Any help will be appreciated. Thank you
  2. J

    Homage bw 172 no fuel. Priming procedure

    Nope. Not finding any kind of lever. I removed the fuel pump that runs off the cam shaft and tried pump fuel through it by hand and on the bench but no fuel is going through it. I am thinking it might be the pump. Any ideas
  3. J

    Homage bw 172 no fuel. Priming procedure

    Hey I have a Bomag bw 172 roller that one of my guys ran out of fuel. Is there a procedure to prime it back up. I am not getting fuel up to the injectors. And I do not see any pump to pump it up. Any help would be appreciated. Thanks
  4. J

    Cat 315 left track moving by itself

    I have a caterpillar 315 excavator that the left track moves without me stepping on pedal. As soon as I move the unlock stick the machines left track moves backward with me stepping on pedal. I removed the lower cover it see if there was An adjustment and I don't see any. If I put pressure on...
  5. J

    Bobcat T190 misfire

    I tried pointing the temp gun at the exhaust. Looks like cylinders 2 and 4 are running cooler.
  6. J

    Bobcat T190 misfire

    I have a bobcat t190 that seems to be misfiring. I just did a head gasket replacement due to it blowing. I had the had checked which they shaved due to warp and they replaced the springs and seals. Put the head back on readjust the rocker arms. Had a hard time getting it started but it did start...
  7. J

    1990 Mack RD690S clutch

    Does anyone have a guide on a clutch replacement for a 1990 Mack RD690S T2060 transmission. Or at least a clutch adjustment after I install a new clutch. Thanks
  8. J

    Caterpillar 320B stalling at times

    I have a cat 320B excavator that keeps on stalling at times. It doesn't happen all the time. Mostly happens when moving the machine around. I tried replacing the fuel filters. Has anyone else experienced this or have any idea what it could be. It starts right back up after it stalls. Thanks
  9. J

    2006 Mack Granite Trailer Air Brake connection

    Hi I Have a 2006 Mack Granite cv713 Dump Truck. I was wondering if there is a kit out there to hook up air lines for a trailer. if not a kit. at least a parts list that I would need to make it happen. if you could help me out I would appreciate it. thanks
  10. J

    Bobcat T190 slow bucket

    I haven't tried it with a load on it. But it does go up ok. I private messages crewchief888. Thanks for the help
  11. J

    Bobcat T190 slow bucket

    Yes I raises ok. But it does not lower right. It lowers real slow along with tilting either direction. Only when the idle is low. Raise the idle and it does not move at all
  12. J

    Bobcat T190 slow bucket

    Not sure the pressure. How can I test it? Through the aux connection? I also think the pump is the problem
  13. J

    Bobcat T190 slow bucket

    I have a bobcat t190 with foot controls. I can raise raise the bucket no problem. My problem is lowering the bucket or tilting the bucket either way. It moves really slow. If I raise the throttle it doesn't move at all. So the only way to move the bucket down or tilt it in either direction the...
  14. J

    john Deere 544h oil pressure light

    I have a john Deere 544h. Thus doesn't happen all the time but once in awhile the oil pressure light and alarm will come on. I checked the oil level and it is full of oil. I also replaced the oil filter on it. Was thinking maybe a oil pressure sensor if it has one. Has anyone ever have a...
  15. J

    bobcat t190 hydraulics inop

    I also just noticed I have a 17-07 code
  16. J

    bobcat t190 hydraulics inop

    Hi I have a bobcat t190. I can't get the bucket to lift at all. I can get it to tilt a tiny bit. I pressed the override switch and the light for the lift tilt blinks. It doesn't stay on. Any ideas
  17. J

    bobcat 763 cranks no start

    ok I just found out that with a very long mirror that the solenoid does move over while cranking. but it only stays to the on position for 2 seconds then goes back to off position. is that normal. it is starting to sound like it want to start but sadly it does not
  18. J

    bobcat 763 cranks no start

    ok got it to keep cranking again and there is black smoke coming out of the exhaust
  19. J

    bobcat 763 cranks no start

    i tried switching relays cause I really don't feel the relay clicking over and still nothing. is there a way to test that circuit
  20. J

    bobcat 763 cranks no start

    ok I know it is for the fuel shut off solenoid. there is a new solenoid on there already. could it be because I zipped tied the solenoid open. or could there be a wiring problem
Top