• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    T190 Leak

    I’ve been trying to track down a fairly serious leak in my foot control t190 for quite a while and have failed badly so far. The leak shows at the inspection plate below the fuel tank and the hydraulic tank slowly drains. I have no trace of fluid under the hydraulic tank or anywhere in the...
  2. P

    Bobcat T190 Air Cleaner Alert

    Our pedal control T190 threw the air cleaner alert so I changed both filters. This didn't delete the alert, so I changed the sensor which also didn't work. I then decided it was time to take it more seriously and actually looked at the code which indicated a sensor disconnect so I checked the...
  3. P

    T190 MYSTERY LEAK

    I just finished successfully repairing the control valve on my foot control Bobcat T190. I ran it and found no leaks and it operated perfectly. The next day I looked underneath and saw a puddle on the opposite side, coming from the inspection plate under the fuel tank. The machine is as clean as...
  4. P

    BOBCAT T190 CONTROL VALVE PROBLEM

    I have a foot control T190 that has been having a sticking problem with the lift and tilt control. When I go to lower the bucket, it has a hard pedal which when pushed hard will allow the bucket to lower, but with a very sudden jump. We noticed that when the tilt pedal is touched at the same...
  5. P

    T190 Hydraulic Leak- Unknown Source

    Hi, I have an older non-joystick, foot controlled T190. It has slowly developed a hydraulic leak that I've sort of ignored until now when it's gotten too bad to dismiss. I started by cleaning the undercab and then ran it for a few minutes with the cab up and a flashlight in hand but had no luck...
  6. P

    KUBOTA SVL65-2 AUXILIARY HYDRAULICS

    I have a brand new SVL65-2 which has high flow hydraulics. I am replacing my older Bobcat T190 with it. I run a bobcat 6 way bucket on the T190, which has an auxiliary quick connect port. The Kubota has two sets of quick connect, one for regular and one for high flow. Is there any way I can use...
  7. P

    T190 Skicky lift lowering

    Hi, I have an older T190, with foot controls, that I'm having trouble with lowering loads. When I raise a load it operates as it should, but when I lower a load the pedal feels hard and takes some force to get it to lower which results in dropping the load a few inches rapidly. If I tap the tilt...
  8. P

    2014 max force 9

    Hi, Recently had the check engine light come on so I brought it in and they sent the dpf out to get baked clean. After about 100 miles of country hill driving the dpf light came on so I pulled over and ran the parked regen which cleared the light. Now after 50 more miles the check engine light...
  9. P

    Eaton 10 speed loose shifter

    Hi. I have a 2014 International 4400 with an Eaton 10 speed. Yesterday when I went to move it across our yard, the shifter suddenly had several inches of movement. Before I dig into it, I'd like to know what I'm in for. Anyone have an idea of what a repair like this entails?
  10. P

    Eaton 10 speed clutch problem

    Hi, I have a 2014 international 4400 with an Eaton 10 speed transmission. The truck has 120,000 miles and is new to me. I’ve never owned or driven a truck with this tranny or anything similar other than my ‘46 Chevy with a 4 speed crash box:) I studied up on the clutch adjustment and the clutch...
  11. P

    T190 Puffing Steam on Warm Startup

    My 2500 hr t190 just started puffing out steam for a few seconds on warm startup. I thought I'd ask if anyone knows of anything simple that can cause it, or should I think head gasket right off. Also, I recently had the radiator out for a thorough cleaning and after reinstalling I hear a...
  12. P

    T190 traction lock problem

    I have a 2003 t190 foot control machine with 2600 hrs. I recently rebuilt the spools with a lot of great help from this forum. After I successfully completed the operation I worked the machine for 2 hrs and it developed another leak. Of course the first thing I thought was that I'd somehow...
  13. P

    Any experience with Solid tires

    I'm ready for 4 new tires for my Gradall and have been planning to buy a set on EBay and have them mounted and foamed. I pretty well had the costs chiseled down to as low as I could, but when I went to buy them, I saw many adds for solid tires with wheels and free shipping that beat my earlier...
  14. P

    Delco charging system problem

    I have a Gradall 534B which has a typical Delco Remy charging system (internally regulated) identical to a million old GM cars. I have been having a discharge problem with the machine for some time now and have been unable to get to the bottom of it. When I disconnect the sensing wire from the...
  15. P

    Gradall 534B Electric problem

    I have an older 534B with a dead short. I found the problem wire under the dash coming off of one of the two 10amp fuses. I traced it to the plug and found it's location among the pins, where I also found it's number. Gradall was very good about numbering all of their wires but lacked one little...
  16. P

    Bobcat T190 Hydraulic failure

    I have a bobcat t190 with pedal controls and 2500 hrs on it. In the course of an hour it went from lifting and dumping fine to barely being able to do either. The machine itself moves fine. I took to Bobcat for a diagnosis and they said that it had a bad pump which put out 1800psi compared to...
  17. P

    Hydraulic flow tester for cheap?

    I need to test the flow on my t190 and don't have a flow meter. In researching it I came across a used flow control valve for cheap and thought that maybe if I combined that with a gauge, I could get a reading on the health of my pump. Seems like if I hooked it up to the auxiliary hydraulic...
  18. P

    Gradall 534B rear wheel locked in reverse

    My gradall recently locked the rear wheels in reverse. We had to disengage at the hubs in order to move. According to the diagnostics in the book, it's looking like the diode is the culprit, but darned if I can find it. I've studied the electric schematic and while it shows there, there is...
  19. P

    Bobcat T190 hydraulic failure

    I have a t190 with 2400 hrs. It's a turbo/high flow. It's been well maintained by myself and has really been pretty reliable. I just moved to a new job and after about 1 hour of work the hydraulics started to slow. This includes bucket lift, tilt and clamshell. The drive is fine. We parked it...
Top