• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    Michigan 125 loader hydraulic problems

    Check your suction strainers they are in the hydraulic tank.
  2. R

    Clark Michigan 55b third valve

    I'll get you a picture Andy I just can't part with a spool. I run this machine every day for a business and if I ever have a problem is be screwed. There is a hydraulic place in Madisonville ky I'm told is very good
  3. R

    Clark Michigan 55b third valve

    It's a husco valve. I have two of the double spools. I would sell you a section..... But I might need it some day. I can give you a picture of the tag though.
  4. R

    MICHIGAN 175 B

    Pull it off there is a casting number on them most brake places can get them. You can try brake supply or often a simple Google search will turn it up
  5. R

    125B

    I run 85 140 in both my Clarks with no problems but it's a bit sluggish. I'd say 50wt or 8090 will be no problems
  6. R

    michigan 175b loader hydraulics not working

    There is also a Facebook group for the Clark loaders Michigan/Clark equipment co
  7. R

    michigan 175b loader hydraulics not working

    Follow the discharge hose to the main valve. It probably a husco valve above the front axle like my 275b. In that valve will be the relief valve on it. Ahould be one with a smaller allen bolted cover. Do you have your serial number? A place called sycamore enterprises sells service manual for...
  8. R

    Clark Michigan 175C Loader Only moving in reverse

    Which if it is toast don't panic because it's very cheap and easy to rebuild those. Everything about these Clark transmissions is beautifully simple and easy
  9. R

    Clark Michigan 175C Loader Only moving in reverse

    It can be one of two things... declutch valve which you can remove and get the plug for it from Palmer Johnson power systems for oem Dana Spicer parts which used to be Clark. Or bpt components in Canada. They have after market stuff. But easy to tell If it's the dexlutch with a simple pressure...
  10. R

    Michigan 55a

    The fan is held on by 4 bolts. 5/16 Course thread if I rembwr right
  11. R

    Michigan 55a

    You need to set the governor by the book. It should have a limited speed governor. Very simple and awesome when they are right
  12. R

    Euclid r 50 324ld front strut charging specs PLEASE

    I have a 1987 euclid 324ld (r50) with nitrogen front struts and I need to know the strut charging procedure. Bought it at an auction with the struts degassed maybe de oiled too for transport. Any help would be great
  13. R

    Cat 980g implement pump nightmare

    Yes new pump and adjusted pressure fixed it
  14. R

    Clark 175B steering colum leak

    Haha depends where are you located? You will also want to get a speedy sleeve for the shaft mine was messed up
  15. R

    Clark 175B steering colum leak

    Skf seal number is 12371 for the 55b but I'd bet it's the same as yours it's really not that hard to remove I'd recommend 2 people to do it though
  16. R

    Cat 980g implement pump nightmare

    New pump was installed a while ago. Checked relief pressure and it was 700 psi over spec! Got that back to where it should be and so far it seems good. What's strange is the relief pressure has never. Wen touched by us. We have had this machine since 2004. The vane pump that was in it had 18220...
  17. R

    Michigan 75iii bucket pins

    If you can't find them look up ebushing.com give there office a call they have some bushings not listed too. As for pins you can buy some 4140 steel rod from McMaster care and make your own I've done it and it works well
  18. R

    Clark 175B steering colum leak

    Also that Pittman arm is probably loose as a goose in an older machine and that will cause really jerky steering. Mine had that and I tightened that Pittman arm with the rebuild but it also had a cracked race on one of the internal bearings but now it's smooth as silk
  19. R

    Clark 175B steering colum leak

    What's leaking is hydraulic oil into the upper gear case. And it over flows that. The lip seal can be bought based off dimensions I have the part number for the one in my 55b but dunno of it's the same as the 175
  20. R

    Clark 175B steering colum leak

    I think they are all the same. I did mine on my 55b. Was a pain in the butt to remove from the loader to rebuild but very simple to rebuild. It has a nut on the center shaft on the bottom mark that nut and put it exactly back where it was. Other than that simple. Too tight on that nut or too...
Top