• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Case 430 blowing blue smoke

    I wouldn't do anything until all the old fuel is gone besides adding power serve injector cleaner or similar. Steve
  2. M

    Can anyone help me with cat?

    Check and clean all of the fuses, my brother had all sorts of problems with a 277 which turned out to be a corroded fuse. Low voltage to the left joy stick when they hooked it up to Cats expensive computer ($750) . Use some dielectric grease when putting them back in. Steve
  3. M

    Bobcat s650 vs s300

    My neighbor farmer has a 650, said he had a lot of trouble with the emissions bs Steve
  4. M

    In search of first skid loader....Case xt series

    I've had a Case 75xt for over 10 years , great machine with silky smooth hand controls. Steve
  5. M

    JCB 225 no hydraulics.

    Isn't there a hyd release valve on the back of the machine when you open the door, seems like I've seen one on my Volvo but have never used it. Steve
  6. M

    Case 75xt schematic

    Check the fuses under the left arm, they get corroded. Steve
  7. M

    S 650 Bobcat blown 100 amp fuse

    New But even at that wouldn't it have blown the glow plug fuse or burned out the relay before it went all the way back to the main fuse? Most likely and that's why it could have been a bad fuse. Steve
  8. M

    S 650 Bobcat blown 100 amp fuse

    Could have just been a bad fuse, I'd run it until it does it again. A starter takes way more than 100 amps, just the solenoid circuit would be running through the fuse. Steve
  9. M

    Clearing snow in the old Case 1845C

    I think chains are easier on the drive chains as there is a lot of give when the tire rolls over the links. Whats hard on the drive chain is uneven sized tires on a hard surface. Steve
  10. M

    Another Perkins Pukes

    Seems like after Cat took over Perkins the trouble started , never heard of much trouble with Perkins before that, farmers loved them. Steve
  11. M

    Hello Everyone New Member here ready to buy a new skid steer

    Those 75hp machines are most likely under rated by quite a bit to get by EPA regulations. Steve
  12. M

    Dealer issues

    So what model Volvo or JCB went bad in 500 hours and what went bad. mine is way over that with no trouble. Maybe a bad operator. Steve
  13. M

    Dealer issues

    Good dealer, not many will admit their mistakes. Steve
  14. M

    Dealer issues

    That's a slam on JCB or Volvo for no good reason, I'd have guessed it the same as the machine you use. Steve
  15. M

    Foot, hand or dual controls

    I'll take Case hand controls any day of the week and I've run all of them. Steve
  16. M

    328 deere speed

    Most likely is a adjustment but if its just a little difference don't worry about it, most skid loaders are not perfect. It can change with tire size or even with the slope on the road. Steve
  17. M

    Case 40XT Problems, Please Help

    My 75xt has the smoothest controls of any machine I've driven Steve
  18. M

    CAT 279C Issues

    Tank vent, maybe a weak fuel pump
  19. M

    Case 75xt....nothing

    Thanks Gary, mine is working fine but where is the cab switch just in case it quits. Steve
  20. M

    Case 1835C Uniloader Won't Start After Fuel Filter Change

    Any updates?? Steve
Top