• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Broke hub spoke

    Absolutely worth changing all of them to hub pilot. We have a 99 international paystar 5000 tri-axle. We found them all used at the salvage yard. Only thing is your axles are like 5/8 holes to bolt to hub. They're the only ones that'll work.
  2. M

    Mercedes MBE 4000 year variants

    So I've got this 2008 Sterling lt9500 that came equipped with Mercedes mbe4000 w/ dpf and egr....Well she spun her last circle last month. I've been a mechanic for years but have no knowledge of these engines. That engine is hard to come by. I'm trying to see since mine has been fully deleted...
  3. M

    Deleting error codes?

    How do I delete/erase error codes on a komatsu pc360-10 and a hm400-3? Problem has been fixed.
  4. M

    Komatsu PC 360 lc troulbe code L03

    OK I started with this company 3 weeks ago. Here in Tennessee we have probably 25 various komatsu units,its all we use. The company ditched our old fuel company after several attempts to have them clean up there fuel....or so that's what everyone was hollering. When I started they put me after...
  5. M

    Komatsu PC 360 lc troulbe code L03

    Ok I have a Komatsu hm400-3 that's throwing CA357 and I can't find that code anywhere also on the pc360 the code was too much water in fuel circuit. I've told them 300 times our fuel is junk. We actually just changed companies because of that too.
  6. M

    Komatsu PC 360 lc troulbe code L03

    I'm going to pull them codes this afternoon and I will update.
  7. M

    Komatsu PC 360 lc troulbe code L03

    Thank y'all fro the replies. Everyone has always been helpful in pointing me in the right direction. I will check those things first thing in the morning. I'll ask again what was blocked off. When the machine was new Komatsu done what ever it was to keep the guy from returning 4 pieces of...
  8. M

    Komatsu PC 360 lc troulbe code L03

    So I have recently started back to work for a utilities contractor after some years off as a service tech. 2 things have came into play since I've started back, I've never serviced Komatsu equipment which is what brand this company has and all this DEF and emissions crap. In the past I've been...
  9. M

    kobelco ED150 Safety switch??

    Kobelco Ed 150 was operating to day and was working properly. I pulled the safety lever to exit machine for a minute. When I got back onto the machine I activated the lever it made a beep beep but it had no controls like the lever was still activated. I messed with the lever for little while...
  10. M

    cat 735 won't shift out of first gear

    Well I went directly to the lock up solenoid and valve to check the ohm's. It measured a lil high but still in range. So Itook off the whole solenoid to check ooperation of the valve and at first it was somewhat stuck in place, after it came free I checked the ohm's and it read way out..like...
  11. M

    cat 735 won't shift out of first gear

    Mattoliver80@yahoo.com
  12. M

    cat 735 won't shift out of first gear

    AWR00516 is the last 8#s... I know for a fact that the lock up is working on the other one b/c of what you said it would almost feels like it shifts but it doesn't. The one that's not shifting doesn't do it at all. Is there any way to check the converter from the outside???
  13. M

    cat 735 won't shift out of first gear

    Whole truck has 9660hrs and we bought it at auction. Is there a way to check the lock up clutch or does the tranny have to be pulled. We bought 2 and they came from the same company and the other one was not bad at all and fluid was clearing.
  14. M

    cat 735 won't shift out of first gear

    No difference on rpm and when you start out downhill it goes for a little bit before it shifts to second then it goes on through the rest of the gears like it should. Seems like not enough ground speed and the converter issue would make since
  15. M

    cat 735 won't shift out of first gear

    4 mph and it throwed the code for the filter being stopped and the warning alarm sounded and wouldn't go off. That stopped after I changed filter and oil.
  16. M

    cat 735 won't shift out of first gear

    I'm here at it now and it says model 735....product id # CAT0075.. circumstances up to this point were..throwed code for trans filter stop up,changed all oil and filter. It was not going into drive most of the time. Sometimes it would. Fluid had lots of metal on both magnets and fluid was black...
  17. M

    cat 735 won't shift out of first gear

    Hold gear is not on or is in 8th.. About 2150 max on rpm
  18. M

    cat 735 won't shift out of first gear

    Caterpillar 735 articulated truck will not shift out of first gear on flat or uphill grade but will downhill. It's really got me puzzled! Any suggestions would greatly be appreciated.Reverse works normal.
Top